Jbird

I have a pair of Weber 40's, intakes and a new IE linkage for 2002. Carbs need cleaning, they have been sitting on a shelf in the shop for years. $450 shipped in the lower 48.

Location: Atlanta,Ga. USA

Why don't you call Isky?

http://www.uncensoredsurvival.com/front95/

I will Monday if I cannot get the info.  Wanted to make a decision about a cam I had this weekend, and their site isn't very helpful.  Just was hoping someone might have the information.

Any one have a data sheet for the Isky 310 regrind for m10?  Cannot seem to find any info out there.

Thanks,

J

I have a 38/38 with about 500 miles on it, and a factory manifold that's been opened up for the carb for sale. $350. In Atlanta. (678)850-7311

I have a 2002 that needs saving. Rust in the roof and the floor, but none in the strut towers. Believed to have a blown head gasket, was running fine but overheating. Need $750. for it. The wheels are being sold separately. North of Atlanta, must leave a message. (678)950-7311

Year: 1975<br />Make: BMW<br />Model: 2002<br />

As stated. Looking for decent quality AC console. Email pictures of what you've got and a price to the email link above.

Thanks,

Jason

Still have the motor. I might be free to drive down this weekend. you can email me at the link above.

I've been out of contact for a bit, but according to tracking they were signed for today.

Okay kids, Sunday AM. 1470 Holcomb Bridge Rd. It is a waffle house right off the exit for Holcomb Bridge. There is a Starbucks in the same parking lot, so both snooty and regular coffee would be available. Ample parking and only a couple of exits from the event. Caffeine and Octane is from 8-11 So I figured we could meet at the rendezvous point at 8 and then cruise over at 8:30 or so.

Of course

Would it be possible to get an atlanta or a Georgia section? We are trying to get our local club a little more organized. If it is possible let me know what is needed as far as moderators, or assisstance.

Thanks,

Jason

I was just headed here to do the same!!!! Glad I looked around first. I will be out later today to find a good location for a pre-event meeting spot for the convoy.

Any of you local guys in need of a tranny for an automatic? I have 1 laying around the shop, I dont need. I would hate to scap it Give me a call if you need it. (678)850-7311. GONE TO BILL!

I posted it on all my local 02 stuff and the atlanta 02 club site Lorin. I have a set of 13" Western basket weaves, with close to the right offset that would work as rollers until you get something permanent. If you need to borrow them just give me a shout.

Jason

I posted it on all my local 02 stuff and the atlanta 02 club site Lorin. I have a set of 13" Western basket weaves, with close to the right offset that would work as rollers until you get something permanent. If you need to borrow them just give me a shout.

Jason

Oddly enough, this is what it looks like following you up a mountain in a bone stock 02!

Okay guys we have tentatively planed the fall 02 drive for Saturday Nov. 12th. We are still planning meeting times, routes etc. but I wanted to go ahead and make sure everybody marked their calenders. People from the Southside or Atl. can meet up here at the shop and then we can meet up with the Northern members of the group in Dahlonega, and head up into Blue Ridge for the day. I am meeting with Zac tomorrow so we should have more details later this week. Stay tuned...and if you haven't already become a fan on Facebook to keep up with all of the coming events.

https://www.facebook.com/groups/112960582073065/

I have an E21 head that was built by a local M10 race guru. All new components, (rockers, rocker shafts, guides, seals, valves, springs, cam, etc.) It has Isky dual springs, and an Isky 310 regrind. Port, polish, and bench flow by a professional. Head was skimmed a bit but not a ton. All fair offers considered. I can sell w or with out the cam. Email using the link above or call @ (678)850-7311

I have a 121ti head that has new guides seals and valves and has been decked. The customer decided he wanted to go with a different head ( bigger valves, P&P etc.) so the rockers and shafts were never installed. Make an offer. email the link above or call Jason @ (678)850-7311.

I have an E21 head that was built by a local M10 race guru. All new components, (rockers, rocker shafts, guides, seals, valves, springs, cam, etc.) It has Isky dual springs, and an Isky 310 regrind. Port, polish, and bench flow by a professional. Head was skimmed a bit but not a ton. All fair offers considered. email me usin the link above.

I have an excellent gauge surround and center dash piece. No cracks or blemishes. All reasonable offers considered. email me using the link above.

http://s1038.photobucket.com/albums/a462/HeritageMotorsports/Dash%20pieces/

Now we just need more bodies, and more 02's. For you local guys, the next meet is Sat. October 8th. I am more than willing to host again if needed, or if someone else would like to just pm me. I am open to doing any kid of tech session as well, so if you have something you would like to learn to do, post your suggestions.

Just a reminder that we will be having a meet tomorrow from 12-4! We will have the grill fired up so BYOB & BBQ, and hopefully your 02!!!!

96 Rogers St. NE

Atlanta, GA. 30317

I have cut several roofs off of 02's, and always been very surprised at just how rigid they remain even with no roof. That having been said, I would put the support beams in. Better safe than sorry. If you haven't located a replacement roof yet there is a solid 02 at pull a part South, that had a good roof on it.

That would be awesome Harry. The touring does technically run and drive right