CanuckRRS

being there at the shop when this happened, all i can say is that intake noise is amazing! Can't wait to see this badboy on the road!

Looks great! Suspension specs?

Korman Springs (I think), collar/spacer out on the front, can't remember how many dots on the rear for the rubber donut thingy and Billie's I think. A whole lotta fender pulling too!

I'm going to enjoy my new Hot Rod stance for a bit as I just got the wheels/fenders done literally a month before "Booger" went to sleep. Will fix that next season!

my 73 tii just before he went to sleep a couple months ago!

Hi!

I put in an AEM Mechanical UEGO gauge alongside a water temp and oil pressure gauge in my center console.

1) Check out this clamp that AEM makes that doesn't require welding a bung.

http://www.aemelectronics.com/no-weld-o2-sensor-mount-2-inch-660

2) Both AEM and Innovate's guages are an all in one system that include the sensor module. The older innovate had a seperate sensor module and then a gauge but I don't think they sell it anymore. AEM also sells just a sensor module for applications that hook into a ems system or for hook up to an engine dyno.

3) Summit is selling the digital AEM gauge for 170 something, right in your range! http://www.summitracing.com/parts/avm-30-4100

you might not like the modern LED look, that's why I bought the mechanical sweep needle version

Good luck!

looks great Kris! Love how the project is evolving. Hoping to head up to Usic's shop to go over my car soon and check out your M2!

Check out Total Motor Werkes on FB

https://www.facebook.com/?q=#/tmwerkes?ref=stream

Three 2002's being worked on now!

Can Anyone tell who makes these wheels?

Here's a crappy cell pic of my center console

Three AEM mechanical gauges, AFR, Water Temp, Oil Pressure

Nice cup holder -- where did you get those? I'd like to get something similar for mine.

B

Toys R US!!!! it's my spare universal cup holder from my baby stroller!! just found it on the floor one day, looked at it and made it work in my car. Been without a proper cup holder/cell phone holder for 2 years now!

I think the brand is called "Safety 1st"

Here's a crappy cell pic of my center console

Three AEM mechanical gauges, AFR, Water Temp, Oil Pressure

sorry, i edited the email address as I just realized I spelled it wrong

should be wilsoncw DOT chiu AT gmail DOT com

hi Tony,

can you email me offline?

wilsoncw.chiu at gmail dot com

thanks

wilson

I never got that far actually!

I was thinking the combination of 2 sided tape and also the wires from the gauges going into the Tii clock hole would hold it down.

I found a picture from someone else

AEM Gauges do NOT fit. Bezel is too large

The hole size is 52mm

Got this Gauge Pod *BRAND NEW* for my dash and AEM gauges, but the larger bezels on the gauges don't fit. Need to use the VDO gauges. Ended up putting my gauges in the center console.

$85 plus shipping from Toronto.

thanks

Wilson

looking good Kris! I'll be up next week to check out something on my car and look forward to seeing your progress!

i'm 34 i think.....

1973 2002 tii

2006 Range Rover Sport (Daily Driver)

2003 BMW 330i

2001 VW Beetle

1997 Toyota Camry

1993 Dodge Neon

1993 Saturn SL1

1990 Acura Legend

19XX Toyota Camry

1981 Toyota Corolla

i'm in for at least a #1 line

I just bought three spray cans of Agave from www.automotivetouchup.com. Everything seems to have worked out good.

It took about 1.5-2 weeks as they had to mix it and they even shipped to Canada!

Ray Chau's 02

http://speedhunters.com/archive/2011/07/21/car-feature-gt-gt-ray-chau-s-bmw-2002.aspx

Don't know if the top half of a product like this would help you

http://www.aemelectronics.com/engine-management-systems-9/engine-position-module-epm-24/

My new lines have also just gone on and comes with the black #1 line.

It is straight and stiff. I think it also rubs on a runner and also some of the linkage brackets. Still trying to find a solution....

uh... I am a complete gentleman.....hehhee....

The real reason is two fold.

1) The economy sucks so they are hiring mall rats in Bikinis posing as real models. These "models" are getting worse in quality over the last 2-3 yrs

2) I have a nice camera.... I don't want to crack my lens taking pics of these mall rats

I remember back in the day when the talent was A++ caliber and most of the old guys walking the wheel and tire section didn't need viagra!

a majority of it is not BMW related..... but cool nonetheless

http://picasaweb.google.com/wilsoncw.chiu/SEMAShow2010?authkey=Gv1sRgCIvhqfC8x5bLmQE&feat=directlink

I just got back from Vegas. Show is getting smaller!!! They had a bunch M3's and other late model BMW's in the back of the wheels and tires section.

Also spotted a pair of widebody E30's in the front.

I'll post some pics later

wilson

I started off calling mine Booger cause it was green on the outside, brown on the inside.... but then the wife didn't like it so we named him Fred....... because of the rust hole on the floor pan where you could put your foot through the floor and touch the pavement.....Flintstone's style.... hence Fred.