o2obsessed

I need some help with DCOE tuning in the philly area. Im having troubble syncing the carbs without a syncronisor(spelling?). Anyway any help would be great. Send me an e-mail: 325is.andrew@gmail.com.

Thanks,

Andrew

I need a a piece of the sheetmetal cut from the drivers side quater panel. It would go from teh edge of the door sill back to half-way through the wheel well. I can send a pic if it would help. Thanks.

Andrew

Did u get that out of Contenital in havertown?

I replaced the rear shoes and cylanders. I put everything back together and took it for a spin. The rear brakes are rubing. So i returned home tried to adjust them. Then returned to the street and again the brakes are stuck on. So now im lost. Im thinking it may be the parking brake cable needing to be adjusted but not entirely sure. Any help would be great.

Thanks,

Andrew

I'm 18 and live in havertown, pa. let me know if you want any help or meet up for a drive (when u are fully liscened). dont get it done to fast otherwise the next three years will be a long 3 years. 325is.andrew@gmail.com

Andrew

iM HERE OUTSIDE OF PHILLY, IN HAVERTOWN. WE SHOULD GET AN ALL KEYSTONE CRUISE TOGETHER.

I am also interested in them. I live in Havertown. If i hope you live near by. Let me know. 325is.andrew@gmail.com

Thanks,

Andrew

I HAVE DUAL 40 WEBER'S W/ A 288 DEGREE CAM. IT WOULD SEEM THAT THE 3 AND 4 CYLANDERS ARENT FIREING. THIS IS ONLY AT IDLE. THERE IS A SPARK. IM WONDERING IF IT COULD BE AN IDLE JET ON THE CARB. ANY THOUGHT WOULD BE GREAT. THANKS.

ANDREW

I HAVE A FRONT RIGHT FENDER, YOU CAN HAVE, IF YOU WANT TO PAY FOR SHIPPING.

IM LOOKING FOR A LOW PROFILE TIRE FOR MY 13 INCH WHEEL. I HAVE ONLY BEEN ABBLE TO FIND 195/60/R13. ANY HELP WOULD BE GREAT.

Got myself some urthane motor mounts, and they are sweet.

Right now i have 185/70/r13's on my car. I want a lower profile tire and need help finding a place that carry what i want. Thank You.

Andrew

How much fuel pressure should be ran with the dual 40 dcoe's? Should i use some sort of adjustable fpr? Thanks in advance for you help.

On my ti i have a full tii exhaust. Its not overly loud but has a nice throaty sound. I like being able to hear the carbs. suck. It better then a loud rice style exhaust IMHO. Good luck.

Andrew

Will a bad motor mount throw a motor out of balance? Also what are the best replacement motor mounts to get? Thanks.

Andrew

Are all the '02 speedo and tach needles orange? If not where could mine have come from? Thanks.

Andrew

Steve,

I was reading some of your old posts about Suspension Springs. I was wondering how you like them and what spring rate you ended up ordering. How much did it lower you car if at all. Thanks.

Andrew

What is the highest spring rate a 2002 could handle.

Im intrested in the front spoiler. Please let me know how you want the money. 325is.andrew@gmail.com