Jump to content

Search the Community

Showing results for tags 'heater valve cable screw holder'.



More search options

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Categories

  • Technical Articles
    • Body and Interior
    • Brakes
    • Engine and Drivetrain
    • Electrical and Ignition
    • History and Reference
    • Racing and Safety
    • Suspension and Steering
  • News
    • Events
    • Racing
  • FAQ Use

Categories

  • BMW 2002 and other 2 door Sedans
  • BMW Nueu Klasse Sedans and Coupés
  • BMW 700

Categories

  • BMW 2002 and BMW Neue Klasse Colors

Categories

  • Standard and Optional
  • Aftermarket

Categories

  • BMW 2002 and BMW Neue Klasse Models

Categories

  • BMW 2002 and BMW Neue Klasse Registry

Forums

  • Discussions
    • BMW 2002 and other '02
    • BMW 2002ti and BMW 1600ti Owners Group
    • BMW 2002 Turbo Discussion
    • BMW Neue Klasse Discussion
    • BMW 1600GT Discussion
    • BMW 700 Discussion
    • BMW 2002 and Neue Klasse Events
    • Project Blogs
    • Project Blogs - Archive
    • FAQ Articles Construction Zone
  • Technical Resources
    • Technical Articles
    • Colors Database
    • Wheels Database
  • Classifieds
    • Seller/Buyer Feedback
    • Cars for Sale/Wanted
    • Parts For Sale
    • Parts Wanted
    • eBay
  • Off Topic
    • Site Problems, Suggestions, and Questions
    • Off-Topic
    • Test Forum
  • BayArea02's Discussion
  • Texas's Discussion
  • Australia Owners Club's Discussion
  • Chicago '02 Group's Discussion
  • Florida's Discussion
  • Georgia's Discussion
  • Mid-Atlantic's Discussion
  • Midwest's Discussion
  • New York Owners Group's Discussion
  • Nor'East 02ers's Discussion
  • Pacific Northwest's Discussion
  • Rivertown Gear Busters's Discussion
  • Rocky Mountain's Discussion
  • Sacramento's Discussion
  • SoCal 02's's Discussion
  • Canada's Discussion
  • BC/Lower Mainland Owners Group's Topics

Blogs

There are no results to display.

There are no results to display.

Categories

  • Drives
  • Racing
  • Shows and Gatherings
  • Technical Videos
  • Other
  • BC/Lower Mainland Owners Group's Videos

Calendars

  • Events
  • Races
  • BayArea02's Events
  • Texas's Events
  • Australia Owners Club's Events
  • Chicago '02 Group's Events
  • Florida's Events
  • Georgia's Events
  • Mid-Atlantic's Events
  • Midwest's Events
  • New York Owners Group's Events
  • Nor'East 02ers's Events
  • Pacific Northwest's Events
  • Rivertown Gear Busters's Events
  • Rocky Mountain's Rocky Events
  • Sacramento's Events
  • SoCal 02's's Events
  • Canada's Events
  • BC/Lower Mainland Owners Group's Events

Product Groups

  • Parts
    • Suspension
    • Engine and Drivetrain
  • Advertising
  • FAQ Accessories
  • Memberships

Marker Groups

  • Members
  • BMW Repair Shops
  • Race Tracks

Categories

  • BMW '02s
  • BMW '02 Cabrio and Targa
  • BMW '02 Touring
  • BMW 2002 Turbo
  • BMW Neue Klasse
  • BMW 700
  • Other BMWs
  • Non BMWs

Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

Joined

  • Start

    End


Group


AIM


MSN


Website URL


ICQ


Yahoo


Jabber


Skype


Location


Interests

Found 2 results

  1. The heater box of the BMW 2002 is simple, yet also a little challenging to rebuild. You really need to pay attention to how the system works before taking it apart. If the car doesn't have an A/C unit, removing the entire box from the car isn't too hard. There are a few common problems that all of us probably have with this box after 40 something years: 1., the blower fan has probably frozen or has become noisy; 2., the heater valve mount has broken and 3., the control cables are frozen, therefore unable to divert the air from defrost mode to heat mode. Your heater box may have one of the above problems or all of the problems. Many of us decided to live with it due to high cost of repair, and now replacement parts are no longer available; perhaps we took on the challenging task to rebuild one these boxes. I own a reputable shop in San Francisco. Me and my employees have been working on many of these beautiful '02s for quite some time. One of the many requests I receive is to rebuild the heater box. Rebuilding the box is not that difficult, but it’s just a little challenging due to small amount of parts available. Some parts are still available fortunately, however some are not. While the heater valve (without the lever) is still available new (but at a very high cost), replacement blower motors are also available, but it doesn't include the fan blade anymore. The heater lever and cable holder screw are also no longer available, and that means you can't get them anywhere except searching for used parts. Therefore you have to be creative. Heater Valve Mount: This is the plastic bracket area which is also part of the box. They break due to age and stress from the valve being opened and closed all the time. Because of weather exposure and rusty coolant, the valve starts to build up resistance when being opened and closed, making the plastic mount prone to breaking where the valve is mounted. And once it breaks, there’s not much else that can be done since the plastic tab is molded together with the whole enclosure. Although it may still work because the valve is supported by the two heater hoses, it doesn't feel solid anymore, and often the heater control cable kinks or bends. However, not all is at loss: I have designed an L shape bracket with spacers. The bracket is mounted and reinforced by rivets directly into the box, and the spacers are there for the heater valve to be mounted inline with the heater core. The bracket is made of steel, and will last much longer than the original plastic bracket on the box. Blower Motor: Replacement motors still available online, but you need to find a replacement fan blade. The motor shaft is 1/4" diameter, so you can buy a 5-9/16" dia plastic fan blade with a 3/16" bore diameter online, but you would need to drill (15/64") it slightly. After that, you can then press fit the fan blade into the shaft. However, the really important part of this is that you need a drill press to drill it on center. Otherwise, if it’s off center, the fan blade will wobble/ vibrate, ruining the whole rebuild process. I’m sure that all of you wouldn’t want to have that! Heater Valve Lever: This part is not available and you need to reuse the old one, but the bigger problem here is the screw that holds the cable. The screw has a hole drilled in the middle for the cable to go through, later being secured with a nut. Over time, the screw becomes rusty and is very easy to break when you try to remove the nut - Usually the nut has become frozen. This is a special screw: it's a 4mm step screw with a hole. The step is there for the screw to rotate freely when the cable push the lever back and forth. Fortunately, for all of us now, I have designed a special screw with a spacer to adapt to a custom heater valve lever that I have designed myself as well. The rest of the process of rebuilding the heater box is straightforward, as long as you pay attention to the flaps and cables operations during removal. Cleaning, painting and repairing cracked boxes is a tedious job. And even then, you would still need to replace the sponges that prevent air leaks from happening. You need to replace the sponge with a good material so that it doesn't degrade quickly. Neoprene sponge/foam is a good material for insulating all the flaps. You can see the pictures below from the beginning of the process to the final rebuild, including the reinforcement bracket and heater valve lever. If anybody is interested in getting these brackets and levers, you can email me at [email protected] Thanks for looking! Note: More photos can be seen in the Google document at this link: https://docs.google.com/document/d/1iMB3TRTFj-hLOTmeSdKWDUFvIdDqwqSx3cPiBtHYHw8/edit?usp=sharing
  2. After 40 something years, many of the heater boxes are out of service or partiallly working. A lot of us just gave up because it seems too complicated to repair, but in reality, it's not so bad. Most of the problem lies within the broken heater valve bracket, although the valve still stays in place. However, the operation doesn't feel solid anymore. You can't repair the bracket, because it's part of the box. I have found a solution by making a special reinforcement bracket... The heater box of the BMW 2002 is simple, yet also a little challenging to rebuild. You really need to pay attention to how the system works before taking it apart. If the car doesn't have an A/C unit, removing the entire box from the car isn't too hard. There are a few common problems that all of us probably have with this box after 40 something years: 1., the blower fan has probably frozen or has become noisy; 2., the heater valve mount has broken and 3., the control cables are frozen, therefore unable to divert the air from defrost mode to heat mode. Your heater box may have one of the above problems or all of the problems. Many of us decided to live with it due to high cost of repair, and now replacement parts are no longer available; perhaps we took on the challenging task to rebuild one these boxes. I own a reputable shop in San Francisco. Me and my employees have been working on many of these beautiful '02s for quite some time. One of the many requests I receive is to rebuild the heater box. Rebuilding the box is not that difficult, but it’s just a little challenging due to small amount of parts available. Some parts are still available fortunately, however some are not. While the heater valve (without the lever) is still available new (but at a very high cost), replacement blower motors are also available, but it doesn't include the fan blade anymore. The heater lever and cable holder screw are also no longer available, and that means you can't get them anywhere except searching for used parts. Therefore you have to be creative. Heater Valve Mount: This is the plastic bracket area which is also part of the box. They break due to age and stress from the valve being opened and closed all the time. Because of weather exposure and rusty coolant, the valve starts to build up resistance when being opened and closed, making the plastic mount prone to breaking where the valve is mounted. And once it breaks, there’s not much else that can be done since the plastic tab is molded together with the whole enclosure. Although it may still work because the valve is supported by the two heater hoses, it doesn't feel solid anymore, and often the heater control cable kinks or bends. However, not all is at loss: I have designed an L shape bracket with spacers. The bracket is mounted and reinforced by rivets directly into the box, and the spacers are there for the heater valve to be mounted inline with the heater core. The bracket is made of steel, and will last much longer than the original plastic bracket on the box. Blower Motor: Replacement motors still available online, but you need to find a replacement fan blade. The motor shaft is 1/4" diameter, so you can buy a 5-9/16" dia plastic fan blade with a 3/16" bore diameter online, but you would need to drill (15/64") it slightly. After that, you can then press fit the fan blade into the shaft. However, the really important part of this is that you need a drill press to drill it on center. Otherwise, if it’s off center, the fan blade will wobble/ vibrate, ruining the whole rebuild process. I’m sure that all of you wouldn’t want to have that! Heater Valve Lever: This part is not available and you need to reuse the old one, but the bigger problem here is the screw that holds the cable. The screw has a hole drilled in the middle for the cable to go through, later being secured with a nut. Over time, the screw becomes rusty and is very easy to break when you try to remove the nut - Usually the nut has become frozen. This is a special screw: it's a 4mm step screw with a hole. The step is there for the screw to rotate freely when the cable push the lever back and forth. Fortunately, for all of us now, I have designed a special screw with a spacer to adapt to a custom heater valve lever that I have designed myself as well. The rest of the process of rebuilding the heater box is straightforward, as long as you pay attention to the flaps and cables operations during removal. Cleaning, painting and repairing cracked boxes is a tedious job. And even then, you would still need to replace the sponges that prevent air leaks from happening. You need to replace the sponge with a good material so that it doesn't degrade quickly. Neoprene sponge/foam is a good material for insulating all the flaps. You can see the pictures below from the beginning of the process to the final rebuild, including the reinforcement bracket and heater valve lever. If anybody is interested in getting these brackets and levers, you can email me at [email protected] Thanks for looking! Note: More photos can be seen in the Google document at this link: https://docs.google.com/document/d/1iMB3TRTFj-hLOTmeSdKWDUFvIdDqwqSx3cPiBtHYHw8/edit?usp=sharing View full article


×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.