Jump to content

InkaSam

Solex
  • Content Count

    1
  • Joined

  • Last visited

  • Feedback

    N/A

Community Reputation

0 Neutral

About InkaSam

  1. So far I've put the fuel tank back in, rewrapped the wiring harness and taken all the brake parts off for reconditioning. But I've just now started taking photos so i'm going to jump in with this one of the firewall with insulation put in. The rotors back from machining: New rubber parts for the callipers: Bearings repacked, rotors and callipers back on: The steel lines in and the reconditioned master cylinder mounted: Took me weeks to get the various bits and pieces for the heater box and rebuild it, unfortunately I was having so much fun with it that I didn't take any photos! The pedal box and the pedals got a bit of a paint job and put back in. The handbrake mount is so flimsy! You can see the crack in it already. The aim of this stage of my restoration has been to put things back together and get the car moving although it has been hard with scope creep getting the better of me at times. I'm aiming to just replace/fix things which are obviously broken or will break very soon, the handbrake mount is one of those things. First a shot of it with the nice cracks showing after the paint stripper, then a shot of the butchered welding job I did on it: The handbrake cables were really stretched so I had to use 2 metal tubes as spacers to get the cables tight enough to lock the wheels. The handbrake switch is a bit of a joke, I have it adjusted now so that after one click of the handbrake lever the circuit is completed but I can see that it wouldn't take much to knock it out of adjustment. I haven't put the rubber boot back on so I'm not sure how it's going to go with the handbrake cable bolts sticking out so much, if it looks like it's going to rip the rubber I might have to undo it all, cut the bolts and shorten the spacer tubes.


×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.