Jump to content

DrA76

Solex
  • Posts

    175
  • Joined

  • Last visited

  • Days Won

    1
  • Feedback

    100%

Everything posted by DrA76

  1. I flush the radiator. Checked all grounds. While driving gauge at 3 o'clock In traffic 2 .
  2. Thank you for your input. I will flush and clean the radiator tomorrow. Check for leaks and ground.
  3. It's 82 degree out side. And the temperature gauge shows higher than usual reading! Is that normal?
  4. I have power brake , so I can't use a box type air cleaner. The second carb from firewall has only 1" of clearance. So a mesh type is my only option.
  5. No duel leak from carbs, I am using electric facet red top fuel pump .filter king with regulator set at 3psi. New fuel line ,no leaks. I might need an air cleaner, will mesh type work?
  6. I was the passenger. I guess the driver had the burrito .😅
  7. No oil leak from exhaust . Had a leak on #2 but fixed that. New foam on shifter. Boot looks ok. No air cleaners on dcoe.
  8. I deleted the heater . 2 speaker holes , no speakers but shelf sealed with wood and leather panel. No vapor canister. All new fuel line and clips No vent tube. The smell can only be noticed from the driver seat. Nothing on passenger side! .
  9. I have a single center exit tailpipe 2" longer than the euro bumper. All seals are new and tight.
  10. Windows down. All new hood seals. It's more of a smoke smell than gas.
  11. So I am running 45 webers . Tuned and balanced. After few minutes of driving I can smell gas , not much but noticable. Is that normal?
  12. Thank you .will try that on Saturday.
  13. I replaced the headline on my 73 and forgot to mark the location of the rear view mirror. And i cant feel any bracket or under the headliner. Help appreciated.
  14. Looking for 73 throttle linkage pin and clip.
  15. What's an acceptable reading for weber airflow meter ? Mine at 5 on all 4 carbs. But black smoke coming from exhaust.
  16. looking for the following parts 35411105778 (2 pcs) 35414440133
  17. Just received an email from pelican parts the the part that i need out of stock. so ill post in wanted forum.
  18. I am not sure where i got the part from i have so many new and used parts . I have Just orders the correct parts .
  19. The throttle linkage on my 73 keeps on getting loose . Not sure why. Maybe my setup is not correct. Picture attached
  20. Looking for internal headlight aluminum cover .
  21. Regulator pressure 2.5 psi Idle 2k Quarter of turn clockwise on each carburetor till i got this result . I guess i was lucky ? Don't have flowmeter so i used a hose .
  22. Update No leak . I checked with carb starter. Engine seems to run smooth now Cold start video After 20 min and a short drive around the block
  23. yes i am missing the washers, the kit came without washers. i am sure ill change the mounts at some point. the the throttle linkage upper and lower nuts , will send pictures.
×
×
  • Create New...