Jump to content

BarneyT

Turbo
  • Posts

    1,729
  • Joined

  • Last visited

  • Days Won

    171
  • Feedback

    0%

Everything posted by BarneyT

  1. in the Spirit of out side the box, after 40 years I wanted an A/C that actually works the unit I used blows twice the CFMs of a standard unit and for me that was always the weak link... When I was setting up my a/c the guy that helped me used interior coil size / cfm air flow to determine exterior coil size...the interior unit I used blows 840 cfm and the Calculations based on my interior coil size called for my exterior coils to be approximately 10% larger than the two 12 x 16 that I used, the A/C tech assured me that was close enough. .I relocated the hood brackets to allow coils to past behind. it’s an 74 automatic and I drive it a lot...
  2. The max is two 12”x16”...but you have to remove a lot of metal.
  3. Baur back from being repainted...400 plus miles only a few parts loose...
  4. Drove up to marble falls to me some friends at the Blue Bonnett restaurant for breakfast about 95 mile round trip...
  5. Not sure if this is too much, but I hope it helps... IMG_0263.MOV
  6. Stopped by to check on progress on our 72 Ceylon Tii at the body shop, glad to see they had started on body work...
  7. It should have a adjustable screw/bolt end on the cable, I have the same set up with a weber 32/36...it’s on the carburetor end of cable with a spring I think...
  8. Rolled pass 10,000 miles on my Inka 73 Tii that I completed two years ago...
  9. I’m looking for a euro plate holder...Like this one
  10. Picked up rebuilt Tii engine for 72 Ceylon from Terry Sayther yesterday, these two soon to be one...
  11. Back together after re-painting...
  12. Looking for a Polished aluminum euro plate ...512 789 35 93 Barney
  13. BarneyT

    Hood

    Looking for a good hood...512 789 35 93 Barney
  14. make them all very upset and jealous by bring this one home...
  15. Picked up my parts from a fellow called cousin Bob who Vapor blasted a couple valve covers and Tii front cover / injection sections and intake parts for my 72 Ceylon... they came out great..
  16. Thanks, I’ll check them out...I really appreciate it.
  17. Can someone share the re-builders for me and approximate cost to rebuild...
  18. Can someone tell me what I have? What the number on top? I’m putting this one in my 72 Ceylon Tii
  19. I took your comments only to promote the obvious quality of both cars, no worries we’re all friends... I made my cars drivers...
  20. Can you email, me your information BarneyRToler@gmail.com

    1. PaulTWinterton

      PaulTWinterton

      Paul Winterton 

      2078 Victoria Drive

      Vancouver BC Canada 

      V5N4K4

      pwinter@cybereyes.com 

      r 604 689 3008

      c 778 689 3008

       

      Cheers!

    2. BarneyT

      BarneyT

      I tried to send you an email but it wouldn’t go earlier, I have eight injectors I need to send you I was getting wanted to get the lowdown on the best way to mail them to you… Thanks Barney

    3. PaulTWinterton

      PaulTWinterton

      Sorry for the misunderstanding.   I'll email you this morning with the details.

  21. First coat of Epoxy primer on front and rear subframes for my 72tii Ceylon project after glass bead blasting...
  22. My son Kane came over and he installed a 38/38 weber in place of his existing 32/36, In the course of messing with the car and changing out the carb we realized the real miss problem was coming from the distributor...the 123 appears to be losing its center bearing or something it wobbles around unnecessarily. We’re gonna get a replacement coming this way and see how it works out.
  23. Well I would get a new box as well, I was just trying to work with your welding class Cort it Does look uniformly rotten...
×
×
  • Create New...