Jump to content

Steven Hage

Turbo
  • Posts

    130
  • Joined

  • Last visited

  • Days Won

    4
  • Feedback

    0%

Everything posted by Steven Hage

  1. #3 looks nice, sometimes I consider going to 15" wheels haha
  2. Those tires are probably too tall and might rub, but yes 15x7 et25 is the "happy place" for most stock body 2002s
  3. Got my car back on the ground after spending a winter on a cart and got the dual carbs mostly dialed in
  4. Hey guys I'm looking to see who has the motor mount brackets that are used to adapt a 2002 subframe in the later model NK. Thanks
  5. Sorry I didn't see your reply until now. That would be great if you could get some measurements!
  6. Hey all, looking for swan neck mirrors if anybody has some available
  7. Hey there I've got a 66 1800 and in the midst of doing a suspension/brake overhaul I want to swap over to a 2002 subframe I've got laying around. I understand to fit a 2002 subframe to an early NK I need to get brackets to adapt the 2002 subframe and motor mounts to the 1800 engine without moving it back. Does anybody have some laying around I could buy or take measurements from? Thanks
  8. Hey there, I'm looking for a set of mirrors for my 66 1800. My left mirror is getting cloudy on the edges and my right mirror is missing, only the stalk is left. Ideally looking for both sides but I need at least the right side Thanks!
  9. Hey guys, just wondering if anybody has a 2 barrel intake manifold for sale, my zip code is 55305
  10. Hey there, are the ratios stamped on the back of the NK speedometers the same as the 2002 ratios? Ive got 2 speedometers and one is a euro speedometer with a W0.786 and the other is a US speedometer and the ratio is W1.4 Thanks
  11. Winter in Minnesota means I gotta put the 02 away, so I put it on a dolly so I could drop the rear subframe and do new bushings and a new LSD
  12. Got my fender and new front lip back from the body shop yesterday so I installed them after work and went to cars and coffee today
  13. Nothing crazy, just drove to work and washed it after I got off work
  14. Hey guys, I'm looking for a set of 2002tii strut housings, if anybody knows where I can find a set let me know please
  15. Changed out the jets in the dual carbs and now it runs a lot better but it's not perfect
  16. I built the retaining wall with a pretty high lip so it won't fall down the hill but also it won't fall down the hill because I put the car in the garage hehe
  17. I fixed the shifter, bled the clutch, dialed out a little camber and now I just have to get the dual carbs dialed properly and do a legit alignment after work one of these days and then it'll be all good
  18. I put new engine/trans mounts and installed a new shifter in my 2002 yesterday and put a new trunk lock in my 1800
  19. How much for the ignition cylinder with keys?
×
×
  • Create New...