Jump to content

Terry Sayther

Solex
  • Posts

    17
  • Joined

  • Last visited

  • Feedback

    0%

Everything posted by Terry Sayther

  1. Hello! I have plenty of good used front struts here in Texas---call 512-627-2314 Terry. $100
  2. I have a set ready to go here in Texas. Not as convenient as Jack's, but not a project either. $200? Is that reasonable---plus shipping
  3. Yes, yours is ugly. I have a used set of 89mm low dome pistons that look useable to me. $200 for the set seem reasonable? More? Less? Head ok?
  4. Hi---I have some of those hubs in Texas also if Sherman doesnt take car of you. Terry Sayther
  5. I like HalBoyles idea of checking to see if the venturi is loose, and while a sticking float/needle valve is possible, I'd check carefully for a loose needle/seat or debris in the seat. Of course, the famous 'heavy float' can't be ignored---we had a new carb recently with a bad float.
  6. I would take the switch back out and see if the problem disappear---I think it will. Then I would get another nut so that the switch could be adjusted properly [as Henning suggests]. I have seen this symptom if the actuating rod is too long, and the switch adjustment too deep might be a similar cause.
  7. Hi williamggruff---I'll buy them if you're selling. Thanks, Terry By the way, I'm leaving for 2 weeks in Mexico on Sunday, so if we don't get this settled before then, there will be a couple weeks delay Terry Sayther 1606 Fortview Rd Austin TX 78704 shop 512-442-1361 cell 512-627-2314
  8. I like the pistons that 71bmr02 pictured. Are they for sale The Pelican pistons are expensive at about $640, the ebay pistons are stock bore
  9. Any one have any new piston sets laying around? Higher than stock compression, bigger than stock bore. I have heads to fit whatever dome you have. Thanks very much---Terry
  10. I have seen this same failure one time about 30 years ago on a street car---very strange!
  11. Yes, this is Terry sayther and I have an Inka rolling NK shell with roll cage that I would sell. I also have various parts for it, though I was thinking of buying a parts car to make reassembly easier---sounds like you have that rusty parts car alteady. If you dont contact me in the next day, I will be out of town for a week or so. Terry
  12. Hey Erin---This is Terry Sayther in Austin. I'd love to help you with your project! I've been working on 2002s since 1977 and I still love them. We have a small team of experienced guys here and we're ready for you! Call me on my cell phone at 512-627-2314 and we'll talk about what you'd like to do---Terry
  13. First annual Texas 02berfest! Gather Friday night, Nov 1, and supper together at a German restaurant in New Braunfels, overnight there and drive into the Hill Country next morning. Lunch along the river, drive again afterwards to Fredricksburg. Gather and tell lies, dine in another German restaurant/brewery, overnight again, breakfast, and head home. What could be better? Texas02berfest.com rsvp to terndeb@saytherauto.com please
  14. until
    First annual Texas 02berfest! Gather Friday night, Nov 1, and supper together at a German restaurant in New Braunfels, overnight there and drive into the Hill Country next morning. Lunch along the river, drive again afterwards to Fredricksburg. Gather and tell lies, dine in another German restaurant/brewery, overnight again, breakfast, and head home. What could be better? Texas02berfest.com rsvp to terndeb@saytherauto.com please
  15. Event Title: Texas 02berfest Event Author: Terry Sayther Calendar: View Event Event Date: 01 Nov 2013 through 03 Nov 2013 (Ranged Event) First annual Texas 02berfest! Gather Friday night, Nov 1, and supper together at a German restaurant in New Braunfels, overnight there and drive into the Hill Country next morning. Lunch along the river, drive again afterwards to Fredricksburg. Gather and tell lies, dine in another German restaurant/brewery, overnight again, breakfast, and head home. What could be better? Texas02berfest.com rsvp to terndeb@saytherauto.com please View Event
×
×
  • Create New...