Roundeie

Lots of good threads. Use the search function. Here’s one of 270...

Fully broken down Sent from my iPhone using Tapatalk Pro

While the Tiptisserie is being broken down for transport, the transaction is completed Sent from my iPhone using Tapatalk Pro

First leg begins Saturday by FAQ’r from Napa Sent from my iPhone using Tapatalk Pro

This isn’t where we thought we were.

Blueprints from DaHose could help with regional duplication Sent from my iPhone using Tapatalk Pro

Update...Looking into possibility of making this collapsible... Will it then generate interest in use? Sent from my iPhone using Tapatalk Pro

I didn’t watch the rollover but checked the weight recently and it appears easy to lift without shell attached. The body / paint guy and assistant are 6 foot plus and easily 1 x 210 + 1 x 250. They make these for each vehicle painted and most of them come from the family of cars shown below. This one doesn’t need it Sent from my iPhone using Tapatalk Pro

Idea is for the next user to pick up rather than disassemble and ship. The unit is welded together. Next user will provide the current user his beverage of choice upon pickup. Single bottle, 6-pack or case. Photo of the transaction to be posted. I’ve asked for these guys... Sent from my iPhone using Tapatalk Pro

If this were a free for all dolly / tiptiserrie for use by any and all members, would it get passed around? Another member plans to pick up within the next couple of weeks and when he’s done.. Would like to see how far away it could get. Location NorCal Sent from my iPhone using Tapatalk Pro

If this were a free for all dolly / tiptiserrie for use by any and all members, would it be passed around? Another member plans to pick up within the next couple of weeks and when he’s done...

PM’d you

Put together by body/paint shop. Functional and simple from my perspective. Measurements taken from diff hangers to subframe mounting points. Sent from my iPhone using Tapatalk Pro

Still available in Modesto Ca for almost free (1 case of Denogginizer)... Sent from my iPhone using Tapatalk Pro

Or bag and wrap for paint and remove the booster bracket. Sent from my iPhone using Tapatalk Pro

Rogerstii has them. http://www.rogerstii.com/bmw-door-mirror-mounting-nut-2002-320i-3-0cs-3-0s/ Sent from my iPhone using Tapatalk Pro

When the body work was done the 5 speed was already part of the plan so the BFH work was included. All relevant threads were studied and Parts gathered along with a transmission lift. Nothing left to chance so I thought. I even took a 5 minute drive to the local BMW dealership to talk to the foreman and came away feeling confident. To be sure I hung out with my local independent shop manager and watched him prepare to install one in this Again I left with confidence. But reality bites... jgerock reminded me to lengthen the reverse switch wiring (wasn’t on the punch list) so I did that. I took my time with the pressure plate + clutch torquing (1 turn at a time on each bolt diagonally), Then I was ready. Box on lift, forward, up, input shaft too close to springs, back, bumping tunnel, down, snag plate lip, back and down, too far left, wth I’m moving in the wrong direction. Ok, up, forward, stuck on tunnel again, down, right, up, check input shaft placement, up, shove, crush reverse switch blade connector ... Aargh@$67hg#!!?!!! 4 days later new switch arrives, along with the 2 quarts of Redline MTL I forgot to put in the gearbox. Yesterday, went smoother though it still required a bit of adjusting positions and some physical effort. As Zaza Pachulia once said “nothing easy, NOTHING EASY “

Unless of course, you look cool already.

Installed the 5 speed

Production date? Sent from my iPhone using Tapatalk Pro

Has the extra section like 245. Can’t see the top front of bell housing where the flywheel timing hole should be Sent from my iPhone using Tapatalk Pro

^^Pretty close Steve. I am told my build date was August 30,1971 Sent from my iPhone using Tapatalk Pro

Not much left to see on mine. Faint 2, 4, and 6 (VIN 2577467) stamped on the label. Sent the vendor manufacture date and VIN in hopes he could produce one. I guess not.

Came today www.car-bone.PL Sent from my iPhone using Tapatalk Pro

I’m done... Sent from my iPhone using Tapatalk Pro