Jump to content

artbo

Turbo
 View Profile  See their activity

  • Posts

    608

  • Joined

  • Last visited

  • Feedback

    100%

 Content Type 

Everything posted by artbo

  1. artbo
    Have you checked to see if these are available new? I bought a set not too long ago I think and they weren’t that bad $. Also they were billet rather than cast/machined.
  2. artbo
    If you are having clearance issues you could run a shorter filter. I can try and dig up a part number if you like.
  3. artbo
    So, are you looking for the early canister style filter assembly? I don’t believe there is a spin on filter housing that re orients the filter to vertical
  4. artbo
    Sounds like a great idea to me?
  5. artbo
    So, in 72 or so the DOT required windshields stay in place during an accident. These strips were riveted onto the pinch to provide a bit of grip for the gasket. The rubber windshield gasket was also changed to accommodate the added thickness of the strips. If you used an early gasket the strips would show after install. For the most part we just chiseled off the rivets and removed the strips! Never had any negative issues. They have nothing to do with retention of the headliner.
  6. artbo
    Hey, just a heads up in case you didn’t know, the turbo gauges and so the holes in the pod are an oddball size. Larger than 2 1/6”
  7. artbo
    Hey, to clarify, are you seeking an overdrive or close ratio 245?
  8. artbo

    4290732

    artbo commented on dlacey's vehicle in Registry

    Looks amazing!
  9. artbo
    Overdrive or close ratio box?
  10. artbo
    PM sent
  11. artbo
    PM sent
  12. artbo
    Hey Steve, they are indeed available from WN. More importantly the output shafts are also available. Funny, these bits were unobtanium in the 80’s-90’s and are now being reproed. Not sure how many 235/5’s were produced, but can’t be too many. The box in my turbo is in desperate need of a new shaft! Thanks for letting me know. Hope all is well with you. Art
  13. artbo
    Thanks for the info!
  14. artbo
    PM sent
  15. artbo
    PM sent
  16. artbo
    Thanks for your response. I sent you a PM.
  17. artbo
    Looked promising, but just got the dreaded three letters NLA. So still on the hunt.
  18. artbo
    Thanks for the heads up!!
  19. artbo
    Hey, I am looking for a four bolt output shaft flange for a 235/5 CR transmission. Splines need to be excellent and bolt holes not oval. If you can help me out please send me a PM with specifics about what you have. Thanks!
  20. artbo
    Hey, the plastic door handle inserts are sided. Which side do you seek?
  21. artbo
    Ok, I’ll take this for $1. Did I miss some part of your ad? Send me PayPal info.
  22. artbo
    PM sent
  23. artbo
    Hey, diagram is actually 51/43?
  24. artbo
    PM sent
  25. artbo
    PM sent
×
×
  • Create New...