Jump to content

Hans

Solex
 View Profile  See their activity

  • Posts

    3,056

  • Joined

  • Last visited

  • Days Won

    1

  • Feedback

    0%

 Content Type 

Everything posted by Hans

  1. Hans
    So it started better before? Did we find out about the coil?
  2. Hans
    Did you set for Tdc?
  3. Hans
    Eleven year old battery that sat a lot. I'd be replacing that. Did you mean 12.6? I doubt it will hold a charge.
  4. Hans
    Aftermarket sound system?
  5. Hans
    Google alternator parasitic draw test.
  6. Hans
    Did you bleed the tensioner? Ant sign of chain hitting front cover walls?
  7. Hans
    Switch plug wires to see if problem follows.
  8. Hans
    Is the crank at tdc too?
  9. Hans

    TDC

    Hans replied to Jdddrigot's topic in BMW 2002 and other '02

    Is there a notch on the CAM flange? Are #1 rockers loose? Is rotor tip under #1 plug wire? Is that the original pulley? Is there OT on flywheel visible through hole?
  10. Hans
    Try some quick start spray to see if it kicks.
  11. Hans
    I got some at local bearing/oring shop. Take the old one on. Or I can mail you one. I had to buy a package.
  12. Hans
    Make sure oil pocket is full when bleeding.
  13. Hans
    New or used, the tensioner should be properly bled. Are you using a step, or go - no go feeler gauge?
  14. Hans
    I think the 02 blue manual is available on here. That gives you quite a bit.
  15. Hans
    Did you bleed the tensioner piston? Are you double checking gap after tightening rocker nut?
  16. Hans
    Decking the block essentially has the same effect as shaving head. I use 1.8 gasket more to deal with fuel octane on 121 head.
  17. Hans
    Not clear whether you rebuilt. Or cleaned all jets and passages with carb spray....
  18. Hans
    Like Toby says. Home depot or Lowes. One hole, use rivet. Come in black. Save your talents for something else.
  19. Hans
    Doesnt look stock.
  20. Hans
    Is the choke cable connected?
  21. Hans
    Google Continental brake hose. Maybe big box auto stores. Dealer in a pinch. Easier to put elbows in new hose, wiggle elbows into master, attach hose to res. Put some brake fluid in hose end.
  22. Hans
    You need to bleed the whole system. Do you have the correct order? How old are brake hoses? May be a bit late, but it may be easier to replace hoses from res to cyl in order to get elbows installed.
  23. Hans
    Underside was a big question mark. Lack of photos didn't help. Or wouldnt have helped. Might be a steal, or might need serious resto. Still, if it drives...... Have to wonder why he only went 500 miles and then offloaded.
  24. Hans
    And. Looks very nice. I have same colour euro CS.
  25. Hans
    What did you do to prep the gas tank? That vac hose from intake past booster looks pretty scuzy - cracks? I'd add another clamp.
×
×
  • Create New...