BK02M5

We still have a few kits for sale. Some have asked if front and rear kits are available separately. Front hood kit is $180 shipped in US. Rear deck lid kit is $170 shipped in US.

More pictures provided comparing a stock torsion bar setup to this hood/trunk strut kit. It was designed to keep full open angle as close as possible to stock as you can see. Pictures of the full open hood and trunk are shown so you can see the entire setup installed.

Dudeland, It's fairly close to stock. I have one 02 with the kit and 1 without so I"ll take pics tomorrow and post. Brian

Yes, thanks. I'll send invoice now.

After good feedback on my car's hood/trunk strut setup, I decided to create a kit for others to add to their 02s. Just completed a small production run of brackets that have been packaged into a kit which includes four struts, 8 brackets, and all stainless steel hardware. This is a bolt on kit using the original mounts with a few extra holes that need to be drilled in the fender and rear 1/4 panel support brace for added fasteners. There is a picture of the kit below and pictures of each bracket installed on hood/trunk/fender/quarter panel. We made two additional prototype kits that were also installed on other 2002s with good success. Instructions are included with the kit. Price is $340 including shipping to the continental US. Reply with any questions. Thanks for viewing this ad. Brian

This is an intake manifold with plenum, throttle body and runners. This was part of a turbo project that was put aside from the previous owner. The runners and plenum appear to have been cleaned and painted as you can see in the photos. Fuel rail, injectors and pressure gauge are included on the intake. There is a fuel pressure regulator bolted on. You can see the part numbers on the runners and the plenum. Date stamp says '76 so this may be from a 320i. Someone here likely knows more. Let me know if you have any questions. $450 plus shipping Brian

Group of parts here that was from a fuel injection project that was never finished for a 2002. The car was subsequently fitted with an S14. Many of the parts are from an e30 318i including the ECU. TPS and AFM and much of the engine/ECU wiring harness is included. Distributor appears to have been modified with an optical pickup. There is an MSD ignition module, washer reservoir, some gaskets, and a few other random hoses/tubing. Brackets and tubing were likely a home fabri cated setup to go in a 2002. There's also a bag of wiring labeled motec. $150 plus shipping for everything. Price lowered.

Still for sale.

jrhone: This is a driver side (left) regulator. Description has been corrected. Apologize for the confusion.

More pics

Good condition, bearings spin free, but I'd replace just cause it's much easier out of the car. Threads on the shaft are in good shape. Price is $70 plus shipping

$19 UPS Ground to Houston

No hardware comes with this or plastic covers.

This is a refurbished ECU from Programa. It was purchased for a project that was never completed. Bosch part number: 0280000328 BMW Number 13611466343 $60 plus shipping.

Used Driver Window Regulator - crank mechanism works well. There is a missing plastic wheel on the end of the arm as you can see in the picture. If yours is okay, you can just swap over the wheel. $80 plus shipping

Used battery tray with light surface rust. It should clean up nicely then paint. It was removed from my car 30+ years ago. Need to clean out the boxes of parts. It should just bolt in. $25 plus shipping.

Four intake runners, Lower intake manifold and four adapters with some hardware. This was from a turbo project the previous owner abandoned before getting an S14. Condition of all is very good. No noticeable problems. Could use some cleaning. You get everything in the first picture except for the one wheel stud. Not sure how that got in the pic. There are closeups of the part numbers. Not sure if they were from a 2002 or a 320 or 318. $150 for all plus shipping.