Jump to content

bruno615

Solex
  • Posts

    434
  • Joined

  • Last visited

  • Feedback

    0%

Everything posted by bruno615

  1. Looking for crosshairs, MPH, 120mph, and most importantly, w=1.393 or w=1.390. See a pic for what I currently have in there. Let me know if you have something.
  2. Looking for 1 center cap that comes with the R20's. This would be for the black raised cap, not the flat silver cap. I cracked mine with the torque wrench. They come with 2 styles, so I'd imagine there are some people that have spares. Let me know!
  3. bruno615

    2741264

    1976 BMW 2002 Fjord/Marine Blue Korman Stage 2 Engine (316 Cam, dual webber DCOE 45, etc), 123 Ignition, IE Stage 2 headers, custom exhaust. Full suspension and Volvo Girling front brakes Rota Alpina Style 15's Diving Boards (a proud squaretail) Petri 350mm Steering Wheel, E30 Sport Seats Has been featured in a chase scene: Hanging with The Pumpkin: Hangin' with the Pumpkin before it was a Pumpkin: (Me in back)
  4. Name: Arnold Category: BMW '02s Date Added: 2018-04-25 Submitter: bruno615 Arnold
  5. bruno615

    bruno615

  6. My guess is that you're going to have to vectorize the image then scale up the design to fit the car.
  7. Just got the shipping confirmation for the new Bluetooth version. Can't wait to replace the Tii distributer with one of these!
  8. If you're looking for perfection, the Werk Shop is the place to go. (Perfection isn't cheap). (I have not used them, but have seen some of the amazing cars they've done.) Ben's good too, having been in the game for a long time. I don't think he does paint/body work?
  9. I don't think I've ever seen one so clean!
  10. A project I'm interested in would be using an arduino/raspberry pi to read the RPM using the 4 wire 'info' port in the engine bay and then reading off of a 2 or 3 axis accelerometer. Not sure it's worth the effort though. Would be cool to have max G's for acceleration, braking, and cornering.
  11. Here's what the simplified math works out as if you have a weight at the bottom. Sent from my iPhone using Tapatalk
  12. You can, but the calculation for a bent solid rod isn't trivial. It is much easier for a mass on a string and dead easy if you use the level gauge that the Autospeed guy does.
  13. You're going to get the purists that will turn their noses up. I'm personally a fan though. It's a lightweight, more modern I4. Kind of like the S14 but without the incredible expense.
  14. Looking for a 3 port water neck from a e30 318. Please let me know if you have one. Mike
  15. Nice! Which bit are you using? I tried an aluminum grinder bit, but it was garbage. Ended up using a cutoff disk for the DCOE side of the manifold, which worked nicely since it was only slightly smaller than the holes I was working with. Given the more square design of the engine side, I probably need an alternative to finish it up
  16. Does this work with the IE sidedraft manifold out of the box, or will I have to tap it for individual port vacuum signals, or do I need one of those anti-pulse valves?
  17. I noticed that I am missing the nut and screw combination on one side that pop up the sunroof to close it. Looks like I need the 2,3,4,5 assembly in this pic. Has anyone managed to find a nut/screw/dowel combination that can replace the original? I realize there can't be much tension on the nut, as it needs to pivot.
  18. Did this last night using the starter-bump method (using a test lamp to ensure I didn't shock myself). Took less than an hour total for my first time on a 2002. I don't have a stock cam, but if you think that none of the rockers are fully seated, bump again. Tighen slowly, and feel the feeler gauge tighten/loosen as you tighten the set nut. I use a different technique on the intake and exhaust side (pulling/pushing the coat hanger).
  19. Looking to buy an old style, raised trunk roundel for my '76 2002. PM me if you have one please. I'm interested whether or not it has paint on it. Thanks, Mike
×
×
  • Create New...