Jump to content

krash

Solex
  • Posts

    60
  • Joined

  • Last visited

  • Feedback

    0%

Everything posted by krash

  1. Price:: 450.00 Location: : Tucson m10 engine from 73 , running when parted out from car, 4 speed tranny still attached and read diff with half shafts ready to find new home- all or part out...drive shaft also.. littletonshot@msn.com will ship at buyers expense, prefer to have you come pick it up , or will deliver in Az maybe So. Cal for a small fee....
  2. sold pending funds- so sorry guys- it just went that fast-......post up - sold in 20 minutes offer I could not say not to....
  3. Price:: 200 Ireland Engineering radiator- new never used- with fan kit- $200- with fan plus you pay shipping or come pick up- I can drop off in Tucson if needed and meet in the area around Phoenix the part was placed in car , found out car needs a nose job to clear the fan assembly- so I installed OEM style for now until front clip can get done- contact me directly- I'll send you my number and or text or email pictures or answer any questions. littletonshot@msn.com Parts in Phoenix valley- ( Surprise area)
  4. sounds crazy but any time I see parts in ""Denver"" for sale I just think it's Bryce using another name / account and just pass them on by- OR contact that person in Denver to make sure that have proven track record with previous sales of parts to any one that will , can vouch for them.
  5. all that asked have received pictures, no takers so far, still up for grabs , just letting you all know.
  6. Mike- email returned- looks like you are 2nd if John P. does not contact me very soon...
  7. Price:: 159.50 Location: : Phoenix area this came off the 73 parts car- it's very straight but need love- needs the rubber strip to be complete- not sure if it was OEM but it is the early style with short ends center section and both short ends are still there- NO brackets- some hardware holding it together (not OEM) it could use a good rub with polish , like a rough diamond or re-chrome your call. no rust ( almost 0 ) on facing side but a little here and there on the inside of the bumper Email me- I will send photos to you directly to you littletonshot@msn.com question call 520-370-4999 I ended up with almost 2 sets of everything when I got this parts car we had to cut up, plus the car I am re-building- I need to make room and try to help otehr that may need these parts that are just taking up room at the shop and my home. more parts to come- as we pull them off and decide what to use and what to re-sell- rear diff.- rear sub frame- trans.- let me know what you may need I will see what I have left over WIll ship BUT I will take it apart to get it to fit into smaller box- wrap in bubble pack - box it and you pay actual shipping to your location or PICK UP in person ( Surprise Az. ) 303 and Greenway
  8. got three blanks from 'online' for 18$ w/ shipping, but I don't even have a trunk key at all. easier to get a key made to fit or just yank out the lock mech and replace w/ new one that comes with new key?? now to make copies and stash one set in the tool box, one set glove box, top drawer of desk ,
  9. thanks, the t-zero stuff look very well made, and US made is a bonus. soon I will be deciding what parts and how to do the job and keep the look clean.
  10. registered my two cars (one carnage) and the second would not let me update to content of the message??? Any way- one less 02 out there due to rust- and not enough left to rebuild- it was falling apart from the inside out- between the sheet metal, floors where gone, trunks was missing- even the inside of the roof had a ton of surface rust that just got worse the more you went into the pillars and lower----but I got some spare parts now and the entire ac unit to get my soon to be daily driver going again...
  11. Street... Andrew- Hey man!!!!...just talked with your boss to get other goodies on the way, Thanks for your help in the past when I'v called you guys up- Plan was to move batt. to rear, NOW with brace back there may stick with low profile in the OEM location, BUT wanted to move the filter from block and add oil cooler in one shot..... short list done or doing now - 320i alt. -s14 starter- just did water pump, all new IE Silicone hoses (thanks again) new sway bars, strut braces- new plug wires- plugs- Water thermostat- lots of little stuff before the big ""engine rebuild""
  12. Have seen pics of these from time to time, now can't find the source for these?? Looking at doing an Oil cooler update with the relocation kit all at the same time. I did use search- what a pain- better to reach and ask, too many non-useful posts to sift through and still did not find the info
  13. this morning I wake up to a friendly enough email from DenverTii- "it's been along time....I have tons of parts ---"private sales not listed ""any where""..sounds right fishy- and for some reason the Name Bryce jumped out at me- then it hit me!!! glad I checked in the forum last week and caught this post! I don't ever recall buying from him - IF I did it was blind ebay purchase and it worked out?? No clue- But I think it's odd to get the email when I see soooo many un-happy customers..? MAYBE?? maybe he had my info from a long time back- that I know of , in the last 6 years I have not purchase anything that came from Denver.. Edit: got second email - after telling him his rep was bad ( " name mud" etc..) BUT I HAVE TO SAY THIS- - WOW- blind eBay purchase that did go well , a couple years back - worked out great- OVER priced maybe - BUT IT WOKRED OUT GOOD SO I have to say I did business with Bryce and it all went as it should have - neutral party here- BUT so many folks have bad feelings, even if only half of them are true then what do I believe....
  14. 1st one 73 round tail lights got it in Tucson in 2006, color unknown, silver primer?? interior, none, condition? almost got scrapped out, Paid 250$, then put almost that in tires and starter to drive it home. NOW, it's a parts car, getting prepped to strip for parts, and cut it up, I won;t sell it the way it, not safe, too much floor rot, trunk rot, rust , body cancer....... 2nd car 73 again... My Malaga with a 20 foot paint job, got it in 2007 Phoenix Az. Asking price, 4k, sold for 2k! I almost got it for 1800 runs strong. 130K miles, It had some issue, it looked nice from a distance, then you saw the inside, that scared off half dozen other potential buyers... example it had No back seats, Fronts were frames and blankets over them, no carpet, door cards bad, all rubber--bad So far: things done Needs a brake over haul, doing that, got rotors and rebuilt calipers, IE sway bars, done new shocks and struts, check, still need the front mount done new wire, spark plugs, Dist. cap, rotor, New IE radiator, kill the original..... electric fans going in.... Silicone hoses , check New to me, re-skinned front seat from mid 80 porsche, white centers blue bolsters Grant hub $50 used, New steering wheel, new shift knob Both white both 120 combined. It needed seat belts., check I got new hard line brake line, Need to do, along with Master Cyl, maybe booster to for piece of mind. Pulling ac from parts car for this one. Turbine wheels , from parts car, Check 320 rear view mirror installed, and sun visor, not sure from what, not an 02 though....15$ all together strut braces front - rear Thanks Elefant!!! sparco pedal set 10 $ in blue with new hinge and roller bearing mod. another 15$ Massive dead pedal, very nice. I loved these cars since 1984, my friends older brother had a 76 Malaga, wanted one since 89, tried to get a few m but most cars where not for sale, or priced out of the world, those did not need any work = less fun, this way I got to re-do it as I wanted with out having to strip out good useful stuff for no good reason. there are more parts I have for it, control arms, urethane bushings, center link, tie rods etc etc that will be done along with complete front suspension rebuild.
  15. for a long time my car only had a driver's seat. I now have flip up 'trophy' seats up front, deleted the rears seats. So no reason to go back. Plus It throws the car off when there is more than one person in the car.
  16. NEW, never driven, mounted on the car one time for about 2 hours, Still in the box, STEERING HUB, bolt your Momo steering wheel on this and go...... I found a grant hub and could not get the adapter to go from momo hub to grant so my lose is your gain. 40$ plus Priority Mail any where in the world Paypal is good! ok, i mean. fast twisty corners for all send me pm I will send you pics. thanks Location: az
  17. Check out these guys. they don't have looms but they carry wire. end connecters, spade terminals, switches, etc waytek wire.com I use them for several items.
  18. Valley of the Sun, because we have: Surprise, Lichfield, Avondale, Youngtown, Sun City, sun city West, El Mirage, Laveen, Scottsdale, Cave Creek, Queen Creek, Mesa, Phoenix, Buckeye, Peoria, Tempe, Chandler, Paradise Valley, I am sure some are left out. that's why Valley of the Sun....
  19. what you got is straight up body rot!!! You need my roof, those pics where harsh.
  20. ok, valley of the SUN 02 drivers, we should think a little ahead to give everyone a chance to plan ahead for , said meet and greet photo spread. Might be the only I'll ever get pics posted. LIKE say last weekend of Feb.?? Since every one is so spread out we should try some central local?? It's enough time for most of us to work out bugs in the mechanicals, wash the grime off, wax, buff, what ever feels good to our cars. between now and then , just throwing it out there. We all have stuff going on in our lives so not being in a rush gives us all a chance to be there bring our rides and meet some new cool people. Happy happy etc.
  21. not yet- I could go for the walk around see what's going on, take the kids and wife?? That's clear the other side of the valley for me, with out a legit car I won't show anything there yet, the 18th I hope to be deep into my motor well, and getting the car into Emissions??
  22. huh ?? Pavillions?? I am not in the Know, what- where is this Pavillions>?? I will do a SEARCH of coarse but thought I could get the quick - fast answer here?? Found it. >>>> If I go there I would take my 63 falcon wagon two door or my 68 sports coupe futura, or the 65 four door sedan Falcon or.....yes I like Fords! Don't hate too much. there is a BMW rally?? Meeting I have wanting to roll up on just to harass them with some old school stuff.
  23. thanks got one from I.E. a while ago, need to make the time to pull out old one, replace water pump, new belt while I am there, alt too for good measure etc. time and money.......I have an e30 plastic one that can go to some one that needs it.....I like the new aluminum one I have plus the electric fan set up , great folks at Ireland, they know what they are doing and they even drive these cars not just sell parts like some places.......Raven check your pm. give me a call lets get your car going!!
  24. my car needs new radiator, and emissions done but other than that I need to drive it and find the other stuff P.O. would not take care of. I am at the 303 and greenway, but spend all my time ( in a car ) driving a 98 323Is, blue, I am that guy darting in between blue hair slow as sap driving snow birds and soccer moms driving like blind and dumb *****s. on their phones or texting as they have 5-10 kids in the van?? around here as I haul my brats to school and groceries post office (blah one for the entire dang city??? YOU see a blue 323 going around you??? that will be me it would be nice to drag the old 02's to the 'gatherings' they have with all that new junk the drive - oh wait I drive one too
×
×
  • Create New...