Jump to content

Dsigner

Solex
  • Posts

    67
  • Joined

  • Last visited

  • Feedback

    0%

Everything posted by Dsigner

  1. Year:: 1973 Make:: BMW Model:: 2002 Price:: 18000.00 Location: : Southern Orange County CA This is the last year of the roundies, 1973 BMW 2002 that made BMW famous, this car is in great condition and has always been a Southern California car from day 1 and has no rust. It is currently driven a few times every month since 2011. The car was restored approx. 10 years ago and engine was rebuilt soon before that. Previous owner who removed side markers and relocated muffler exit to center did the paint re-spray. Paint is good and shiny with minor dents, scratches and some fading. There are 2 areas with some very minor corrosion around rear side windows. Interior and dashboard are in very good condition with 320i Recaro Seats upholstered to match ’73 interior along with new Black weave carper kit from Gahh. Sunroof works great. Reason for selling, time for a new project. Engine; A stock motor that was just completely re-sealed by Ronin Autowerks in Fullerton, CA. that has 32/36 weber conversion and M3 Starter, Pertronics Ignitor, 320i 5-speed with Limited slip 3:49 320i rear end. Approx 60,00 miles on rebuild. Starts right up and drives very strong and is very reliable and has run cool in 100 plus outside temps. No oil or transmission leaks at all. Suspension/Brakes; Car is very firm but not harsh due to HR Sport Sprints with Bilstein Shocks and tii struts and Suspension Techniques Sway Bars This car can be driven as a daily driver or shown on weekends with no worries. Cruises highway easily and smoothly at 85 mph. Everything is in great working condition. Asking 18,000 firm. Text or call nine-o-nine eight-1-five 1-four-8-nine. Thanks Serious buyers only please. New/Updated parts: Front seatbelt kit from www.coupeking.com Steel braided brake lines AM/FM Stereo Ireland Engineering upper header Complete engine re-seal Stock Spare wheel/tire K&N Filter in new air cleaner housing Rebuilt Dash cluster with LED replacement bulbs Gahh Carpet S14 Starter Alternator with Built in regulator ROTA Wheels Nitto Performance Tires Bilstein Sport Shocks/tiiStruts BMW 2002tii Brake Rotors and Discs HR Sport Springs Suspension Techniques Sway Bars Rear Shock tower brace with Battery Tray with Optima Battery Many Other electrical and smaller parts (too much to list) Ireland Engineering Front urethane bushing kit and steering coupler (not installed)
  2. Hey All, I am selling my S14 Engine with 151,000 miles on it. I wanted to give BMW2002FAQ community first dibs before I put it on S14 forum. Pulled it out of car and drove before purchasing a year ago. I had plans of installing in my ’73 2002 and have already done a bunch of things to prep for the install. Reason for sale, I am doing a different SWAP at this point. This will be for Local Pick up in South Orange County, CA ONLY and I will NOT part out. Asking $4,800.00 Interested parties can email me at chris dot glaspell at me.com Running Engine Video Link: Here is a list of what’s included: Complete S14 Long Block, 151,000 miles. E36 Timing Chain/tensioners replaced at 120,000. Nickel Plated Stock Header with New Stainless Flange Polished Alternator, Intake Manifolds Rebuilt Stock Injectors by RC Engineering Shortened Aluminum water hose for 2002 Swap Complete Engine bay Wiring harness. Stock ECU with Turner Chip. New Ignition Wiring Transmission Timing Sensors Stock Bosch Intake/Airbox Starter Idle Valve with plumbing Needs: Flywheel Water Pump Dip Stick
  3. Awesome Swap. I have a complete M3 ready to swap in my '02 and after getting rebuild costs over 8K for the lump I gotta wonder how much cheaper this route would be. Love to know more about the install. Cheers Chris Aliso Viejo
  4. Great Pics.. just lost an hour of work looking them over. oh well!
  5. Many Cheers from the west coast! Thanks again for taking the time to snap Picks and post. Can't wait to put your posts to good use.
  6. I read in Grassroots Motorsports that Burns Stainless is making SS Y-pipe and you specify stock or EVO header and OD size. Then I read this article on E30 m3 system... http://www.e30m3project.com/e30m3performance/installs/installs-2/exhaust/exh1.htm Here is link to burns site but they don't mention the S14 app. http://www.burnsstainless.com/crossoversmain.aspx It used to be that you supply flange but I called and they said they have flanges and would build me one with 3" diameter. I'll have to look back and see what the cost was for stainless y-pipe. Cheers Chris
  7. Hey Marshall. Is that the Aardvark Y-pipe? I'm looking at the Burns/Stainless Y-pipe vs. Aardvark's.
  8. Just an update.. I plan on keeping M10 until my S14 is built. Cheers
  9. I agree on the cut technique "it will become legendary" lol
  10. Feeler.....I am swapping Engines and will have a Great running Stock M10 complete with accessories, hoses etc etc ready to bolt in. The Motor is still running strong at 80K miles, no visible smoke from pipe, driven 3 days a week. Welcome to take it for a spin before I pull it. Local pick up in Orange County California. The only mods are; Pertronix distributor Webber 32/36 carb. Alternator with built in reg. M3 Starter tii Manifold 2" system complete. 2000 for Long Block and all Accessories connected to motor? I'm hoping to keep together as a package but may part out depending on interest. I hope to have pictures later but this is what I have for now. http://pr.thecreativeworks.com/2002_PICS/pages/2002_P.htm chris dot glaspell at me dot com
  11. Man this thread is a help! Oil Pan 101!
  12. I Picked up S14 package for swap but don't need the transmission. Getrag 265 151,000 miles on it. 400.00 +shipping chris dot glaspell @ me dot com
  13. I am selling a few things from a S14/M10 Stroker project that never happened. Used S14 2.3 Block, Cleaned, Inspected, Bored to 93.4mm. Asking 750.00 Pics: http://pr.thecreativeworks.com/S14BLOCK/ Used S14 2.3 Crank, has not been professionally inspected but looks to be undamaged. Asking 300.00 +shipping Pics: http://pr.thecreativeworks.com/S14_CRANK_RODS/ Used S14 2.3 Rods, Inspected, Cleaned, Missing 1 bolt. Asking 100.00 +shipping Pics: http://pr.thecreativeworks.com/S14_CRANK_RODS/ Used 1972M10 E12 Head. Inspected, Stock Camshaft/Valves/Springs. Asking 200.00 +shipping Pics: http://pr.thecreativeworks.com/M10_E12_HEAD/
  14. Set of 4 tii Wheels and tires. PICS: http://pr.thecreativeworks.com/tii_wheels Rims: 1973 5x13 BMW 2002 tii, painted years ago with surface scratches and dings, nothing major. Tires: SUMITOMO HTR200 195/50/13 with about 5000 miles, all evenly worn with about 1/4 inch of good tread. 700.00 for the whole set. I am not going to split this package up. Local PickUp in Orange County CA.
  15. Sounds Great. Your car came out very nice. Enjoy.
  16. Amazing how many companies manufacture heads in the V8 HotRod world yet nobody seems to do the same for the M10. I'd love to see a redo to this design.
  17. Has anyone done this? The Item seems fishy.. BMW 2002 318i M2 IFS FRONT END SUSPENSION KIT http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=400127009584&ssPageName=ADME:B:EF:MOTORS:1123#ht_1733wt_941[/url]
  18. This Sucks! I'll keep my eyes open as will all the other '02 owners. This bmw2002faq community has more resources than the P.D. I had a fully restored 73 Datsun 510 stolen in Redondo Beach. When the P.D. showed up they looked at my many picture and responded with.. "They stole THAT?". The shell was found in Compton, bare 2 days later. I feel your Pain! Good Luck Chris
  19. Ahh man, not looking good for me this weekend. Have fun guys!
×
×
  • Create New...