Jump to content

trangieboy

Solex
 View Profile  See their activity

  • Posts

    93

  • Joined

  • Last visited

  • Feedback

    0%

 Content Type 

Everything posted by trangieboy

  1. trangieboy
    I`ve got 2 Ti`s and a Tilux,all RHD. They come with twin 40 solex`s,not 45`s. I can take a picture of the linkage setup one of these days if you like. Mal.
  2. trangieboy
    AND it`s got the steering wheel on the correct side !!! Mal.
  3. trangieboy
    Could you please post up the scans of the engine rebuild article please ? Thanks,Mal.
  4. trangieboy
    Brought 5800 pounds apparently.... Mal.
  5. trangieboy
    Duh !!
  6. trangieboy
    Neil,put me down for the 1800 tail light set. How do i pay you ? Shipping cost to Australia ? Mal.
  7. trangieboy
    I think from memory the tisa wheels are 6" wide compared to 5 1/2" of my ti rims. BUT, they seemed to put more than the extra 1/2" on the outside of the rim if you know what i mean. My idea was to widen some rims to have the same amount of backspace as my ti rims AND the same amount of `frontspacing` as the tisa rims.They could then be 6 1/2" or wider. Mal.
  8. trangieboy
    how do i remove the trunk lock barrel from the rear panel ? Thanks,Mal.
  9. trangieboy
    I thought they had M30 6cyl engines in them or am i confused with something else ?? Mal.
  10. trangieboy
    Has anyone got a decent picture or 2 of what lies under the bonnet ??? Mal.
  11. trangieboy
    Wow, 4 yrs. I can`t believe its been that long. I`ve watched your progress on at least 2 different sites(maybe 3 ?) over that time......and still my own 2000ti sits virtually untouched in my shed..........One day !!!!! Mal.
  12. trangieboy
    Look like a tacho from a Ti to me.
  13. trangieboy
    Check out the quad front lights,amongst other things.Mal. http://suchen.mobile.de/fahrzeuge/showDetails.html?lang=en&id=121991472&pageNumber=1&scopeId=C&sortOption.sortBy=searchNetGrossPrice&sortOption.sortOrder=ASCENDING&makeModelVariant1.makeId=3500&makeModelVariant1.modelId=1&makeModelVariant1.searchInFreetext=false&makeModelVariant2.searchInFreetext=false&makeModelVariant3.searchInFreetext=false&vehicleCategory=Car&segment=Car&siteId=GERMANY&damageUnrepaired=ALSO_DAMAGE_UNREPAIRED&export=ALSO_EXPORT&customerIdsAsString=&tabNumber=2
  14. trangieboy
    Thanks Mr CD. I guess i kind of knew the radiators would be different.Turns out the car i was asking about runs with an after market temp gauge showing 180`F......as far as i`m concerned it should be fine. Thanks,Mal.
  15. trangieboy
    Can someone please tell me if the auto radiator has a cooling pipe in the bottom tank for the trans oil ?? I`m wondering if a manual radiator will go straight in or not. If there are oil lines going into the bottom,what fittings do they have on their ends ? Thanks,Mal.
  16. trangieboy
    G`day from Australia.I have an 02 that is made up of a few different cars it seems. The RH side rear axle has threaded holes for the driveshaft bolts while the LH side hasn`t got threads.It uses nuts on the back instead.Also one rear trailing arm has a sway bar tab while the other doesn`t ?? The RHS with the threads is pretty chewed up too.Looks like it broke the bolts or ran them loose for a while !! Anyone in Australia got a decent rear stub axle ?? Mal.
  17. trangieboy
    Sounds like the camshaft may have been the problem ?? Petrol here (australia) is about $1.80 per litre with diesel almost $2 per litre. Ouch !!!! Mal.
  18. trangieboy
    Am i right in assuming that the 2 long bushes go in the mounting part and the 2 short ones go into the adjuster/tensioner mount ??? Mal.
  19. trangieboy
    Does anyone know where/who sells Urethane/delrin alt bushing AND does mail order ??? also do the e21 alt use the same bushings ?? Thanks,Mal.
  20. trangieboy
    Just use an after market one.Plenty around.Ask at a brake specialist. http://www.hydroboost.com.au/there_are_two_main_types_of_brak.htm Mal.
  21. trangieboy
    Thanks very much for your help !! Mal.
  22. trangieboy
    I`m about to put all new poly bushes in the rear of my car.I have bought the camber and toe adjustable bushes.Which bush do i put on which ?? Does the inner bush adjust the camber or the toe ?? And can i jack both back wheels off the ground at the same time by putting the floor jack under the diff or will i damage the floor ?? And where do i put the stands ?? Under the sills ?? Mal.
  23. trangieboy
    My father had a line burst on a single line `63 ford falcon.Just lucky that no one was killed. I think the twin line BMW system works like this(at least the RHD ones); The front part of the master feeds the front 2 wheels.The rear part of the master feeds the back brakes AND the 2nd line into the fronts. One my single line systems the single circuit master has 1 line that goes to the remote booster.The booster has a 3 way connector on the outlet that sends the fluid to the 2 front wheels and 1 to the back wheels. I`m guessing a LHD car has that conector on the end of the master.I would buy a dual circuit master and bolt it onto your existing booster.Slight bending of the existing brake pipes should give you a MUCH safer braking system. Just my NON expert opinion. Mal.
  24. trangieboy
    I plan on `improving` my single line system by adding a dual line master cyl.The front 1/2 of the MC will operate on the original front calipers and the rear 1/2 of the MC will operate the rear brakes.Not sure yet what size master to use and wether i should go with no booster or twin remote boosters.My car is RHD... Mal.
  25. trangieboy
    I`m about to put all new poly bushes in the rear of my car.I have bought the camber and toe adjustable bushes.Which bush do i put on which ?? Does the inner bush adjust the camber or the toe ?? And can i jack both back wheels off the ground at the same time by putting the floor jack under the diff or will i damage the floor ?? And where do i put the stands ?? Under the sills ?? Mal.
×
×
  • Create New...