Jump to content

SOUTHBAYeric

Solex
  • Posts

    352
  • Joined

  • Last visited

  • Feedback

    0%

Everything posted by SOUTHBAYeric

  1. Megasquirt V2.2 that was on the car running in hopes of continuing with a big power turbo project that never came to fruition. Megasquirt V2.2 board with the relay board and cable. E30 M42 fuel pump E30 water neck with temp sensor Front crank pulley with 36-1 gear welded on EDIS controller and plug wires E30 M10 intake with 5.0 mustang throttle body, bosch brown top injectors and air temp sender SOLD email at ericb7302 at gmail dot com DSCN0012 by burritos, on Flickr DSCN0011 by burritos, on Flickr
  2. Thanks for letting me through. Your little desperation move to try to squeeze past with oncoming traffic made for a hairy situation. You should consider a top end rebuild. That thing smokes like an 80s Benz diesel
  3. I might be able to convince him to sell it back. I will give him a call for you. I could be interested in selling mine if you really are serious about getting back into an 02
  4. Hi Lisa, My buddy still has your old 02 and it is still in Cupertino. -Eric
  5. I need a throttle rod with the part that threads on the end and hooks up to the rest of the linkage going to the carb email me at ericb7302 at gmail dot com
  6. Slap message boards perhaps. Do you have a photo, I am kinda interested.
  7. Pair of front brake calipers that were working just fine when they were pulled in favor of the vented upgrade. Rebuild kits came from a buddy who's 02 got totalled and never got to use them. $50 located in Los Altos,CA email me at ericb7302 at gmail dot com
  8. That is the most beautiful steering wheel I have seen. Perfect color and patina.
  9. Body Condition? Interior? Clean title? Do you have any pictures to post?
  10. 228mm 8 bolt flywheel needs a resurface badly. Ring gear looks good. Located in Cupertino,CA 40$ email me at EricB7302 at gmail dot com
  11. I will take 25 for both of them. I am not sure if I got an email from you as I may have deleted it by mistake. Send me another email and we can set something up
  12. It has surface rust but had never been welded. It is just another aborted project. I have the down bars and they are labeled left and right 250$obo http://www.flickr.com/photos/49951970@N00/5232620710/ email at eb2002 at sbcglobal dot net
  13. Set of working brake calipers I took off the car for the volvo conversion. The pads have at least half life left and the rebuild kits came from a friend whose 02 got totalled before he could use them 60$ plus shipping and 3% paypal if it applies email at eb2002 at sbcglobal dot net http://www.flickr.com/photos/49951970@N00/5232603548/
  14. Interested. Does it come with pads? Is this exactly how it would come from Aardvark? Email me at eb2002 at sbcglobal dot net
  15. If you still have those tags and depending on the last time the DMV knew about the car you may be able to pull that off with little hassle. If you swap the tags and take the car to the DMV and say that the car has been sitting for years and you found it and fully restored the car. The DMV will want to look at the VIN but just say the one on the top of the steering column is the only one and it will fly. The only issue would be the one tag on the body but that is easy enough to cover up. I had to get a 70 registered that had been sitting for 21 years and all they wanted was to look at the VIN, the car had a factory replaced block and a different VIN on the dash from the one on the body and they told to just pick one and that is what is on the title.
  16. Summers Brothers will still make some. Ireland Engineering has them too but they are on backorder.
  17. The smaller yellow tops for Hondas fit under the rear seat
  18. What brand are the seatbelts? I am looking for one autoflug belt and buckle eb2002 at sbcglobal dot net
  19. http://www.flickr.com/photos/49951970@N00/4483354002/> I don't like how I can't see how full it is I hate how it collects grime It is very awkward when you are trying to pour the contents into another container Finally...it doesn't fit under the BMW now that it is lower
×
×
  • Create New...