So I dont have any pictures right now but this is a very easy fix. I can get pics this week if anyone wants them. First you remove the switch from the center console or where ever you have it mounted. Next you will see around the body of the switch several small square openings that appear to have a clip in them. These are what hold the top of the switch and the bottom together. You just have to gently push those tabs in while gently prying up on the top of the switch. I know this sounds tedious and it is. You may have to have several tries at it till all of those tabs are out together. When you get them all together the switch just pops in two pieces, watch for a spring under the red part of the switch. Now on the side of one half you will see a little spring tab with a tong off of it. You just bend that tab in to tighten the Switch. Now try it to make sure everything is tight.