pic request please

[quequieresvonmir]

Does anybody has a nice, clear pic of the original covering cap for the heater fan motor? TIA, Adolf

[penth2o]

http://www.bmw2002faq.com/component/option,com_forum/Itemid,50/page,viewtopic/t,318836/

[quequieresvonmir]

Thank's for your reply, I found that one. But I'm looking for the NLA covering cap, p/n 64111356502 that goes on top of the plastic housing, cover or cage after assembling.

[penth2o]

sorry, let me go see if I can shoot mine.

I've never seen my heater fan so give me a minute.

[penth2o]

That sucks,

Now you got me looking for one.

Mine doesn't have it either. Is a 74 Tii suppose to have it.

It doesn't look like it could fit anything in there. That is going to be a bitch if I have to do heater fan repair before the resto. Its tight in there.

Here is what I have. Sorry I couldn't help but when I search one for mine I'll look out for one for you.

[BillWilliams]

[penth2o]

Thanks Bill & quequieresvonmir

Now I know what to look for. Do all 02s have them or more specific a 74 Tii.

Thanks again.

[BillWilliams]

I do believe they are supposed to be on all 2002 blower motors. The new motors do not come with them so you have to order them separately or reuse the old one.

[penth2o]

Thanks again Bill.

Quequieresvonmir says they are NLA do you of a place to order them.

[jgerock]

As was installed on my old motor (kaput)

New motor/fan assemblies don't include it

[penth2o]

Can you get those anywhere Jim like Bill says order seperate.

or do we have to scrounge.

[quequieresvonmir]

Thank's to all of you but this is not the one I'm looking for. Check Max's website and surch for P/N 64111356502. That one goes on top of the cage cover after you bolt/rivet the box together. It's somesort of a dust cover I think. Some people use a rattle can lid. I used to have a nice pic of it but can't find it.

[penth2o]

Thank's to all of you but this is not the one I'm looking for. Check Max's website and surch for P/N 64111356502. That one goes on top of the cage cover after you bolt/rivet the box together. It's somesort of a dust cover I think. Some people use a rattle can lid. I used to have a nice pic of it but can't find it.

I'm a little confused. Max's pics sometimes are hard to figure out. This looks like the only cover there is. They don't show the one Bill & Jim were talking about so I assumed it was number 7 on Max's site.

[quequieresvonmir]

Yes, that's the one I'm looking for. A nice closeup pic.

[jgerock]

From the graphic, it appears there is/was a larger plastic cover for the end of the motor (kind of like the wiper motor cover).

I've never seen one of those (# 7).