engine and drivetrain what are these holes for

[vintage_car]

I've looked at my before pics and can't find what these holes on the driver side engine bay are for... can someone enlighten me.

[fiftytakedowns]

I dnt think those are supposed to be there, maybe someone drilled em for MSD ignition or the coil or soemthing

[Tommy]

They are for brake linkage/booster support and wiring harness clamps. I think those are all original holes.

Tommy

[c.d.iesel]

....Brake and wiring krap fastening ?

[TimSullivan]

I think two of the rear ones are for the speedometer bracket.

[BillWilliams]

Tommy nailed it in his post above. These photos may help but I do not think they show the wiring loom clips as they should:

[Napes]

I don't know what year your car is (it always helps to post that) but I agree with Tommy and Bill above, but, if it's any help, at least on my ' 75, the bottom two holes (closest to the driver) are for the brake booster bracket and the one above is for a wiring harness clip. The front two are also for wiring harness clips - the upper one for the main harness going toward the battery and headlights, and the lower one takes the smaller branch of wires that go to the the solonoid. I also have one more clip for that branch that is down lower, just above the frame rail. Hope this helps a little.

Bob Napier

[vintage_car]

Thanks guys for the help!

[fiftytakedowns]

i was thinking passenger side, sorry