WTB:

[SLAM105 0]

FRONT STRUT BRACE for '73tii. My email:[email protected]

Phone:954 540 8875. I'm located about 10 miles south of W. Palm Beach, FL.

[Armond 2]

I have one..e-mail sent.

[jonny 1]

An inexpensive e36 brace works very well.

Half the price of most and you only need to drill 2 holes to line up with 2002 bolts.

[02Les 1,054 4 Vehicles]

An inexpensive e36 brace works very well.

Half the price of most and you only need to drill 2 holes to line up with 2002 bolts.

Actually, 3 holes per side to drill. Agree, for $25~$30 shipped on Ebay, can't beat it.

[SLAM105 0]

jonny:

Thanks for the info, but judging by the photos it doesn't look like that strut-brace would fit around/over the tii fuel injection unit(?).

Regards,

Slam105

[jonny 1]

jonny:

Thanks for the info, but judging by the photos it doesn't look like that strut-brace would fit around/over the tii fuel injection unit(?).

Regards,

Slam105

Yes, I did think of that, yet I have never had a Tii parts car to check.

Anyone?

It would be good to know.

I stumbled across this by accident when a friend of mine with an e36 M3 was asking about factory body measurements on the shock towers. low and behold, when I found the measurements to be almost identical to the 2002, I took a shot at it and it worked!!

I posted it here a long time ago....don't know if anyone ever took my investigative results and did the same thing as a result?

[jim325 0]

Nice way to save a few dollars. [email protected]

[SLAM105 0]

Armond:

Never did get the photo of your Strut-Brace.....

Regards,

Slam105/Nick

[02Les 1,054 4 Vehicles]

(nt)

[02Les 1,054 4 Vehicles]

(nt)

[02Les 1,054 4 Vehicles]

jonny:

Thanks for the info, but judging by the photos it doesn't look like that strut-brace would fit around/over the tii fuel injection unit(?).

Regards,

Slam105

Yes, I did think of that, yet I have never had a Tii parts car to check.

Anyone?

It would be good to know.

I stumbled across this by accident when a friend of mine with an e36 M3 was asking about factory body measurements on the shock towers. low and behold, when I found the measurements to be almost identical to the 2002, I took a shot at it and it worked!!

I posted it here a long time ago....don't know if anyone ever took my investigative results and did the same thing as a result?

I saw these E36 ones about 5 yrs ago, and thought I could make it work. At $30 shipped I couldn't go wrong, and, if it didn't fit it could adorn the Wife's E36. I was surprised how easy it was, I just drilled new holes. Don't honestly think the thing is much use other than a shiny piece under hood and for tying things to, like the carb linkage as it kept falling off the Beater before.