Get your sheet metal before she goes to the scrap yard - NY

[jherko]

Email for detailed pics and price, prices will reflect only the time it take for me to cut. Floor pans, frame rails, roof, windshield frame, and remainder of rt rear quarter panel appear to be in decent shape. Buyer pays S+H.

Here's $ for what's left:

Floor pans w/ firewall portion:

Front only $75 each

Rear only: $40 each

Front and rear $110

PS Frame Rail $75

PS Rocker Cover $20

PS Rear Quarter Lower Portion SOLD, Upper portion $20

Roof SOLD

Thanks, Jon

herkojhATgmailDOTcom

[haromich]

I'm after two portions of the floorwork. First, the well that the spare lays in (rather, the metal floor of the trunk, RH side). Second: If your vehicle had the hydraulic clutch system, the section of the driver's side floorboards around the pedals (including the sheet metal "bucket" the pedals mount in.) If you have the styrafoam-like insulation that goes on the underside of the floorboards around the pedals, and the cardboard cover between the pedals, that would be great too). Anyway, I'm looking for any or all of these items. Thanks for looking at my question.

[jherko]

I'm after two portions of the floorwork. First, the well that the spare lays in (rather, the metal floor of the trunk, RH side). Second: If your vehicle had the hydraulic clutch system, the section of the driver's side floorboards around the pedals (including the sheet metal "bucket" the pedals mount in.) If you have the styrafoam-like insulation that goes on the underside of the floorboards around the pedals, and the cardboard cover between the pedals, that would be great too). Anyway, I'm looking for any or all of these items. Thanks for looking at my question.

The spare wheel well has several perforations that were filled bondo, looks ok but has typical rot where it was in constant contact with the spare tire. Its repairable in my opinion, I can cut it out for $25 + S/H. Your second inline for the pedal box surround, first with $ gets it. The complete pedal box w/ sorrounding metal is available for $40 + S/H. I have the interior panels listed in another ad with photos for $30 each / $50 pair + S/H. The exterior firewall pad is pretty dry rotted - I'm not sure I can get it off in one piece. Send me your email and I can reply with pics.

[jherko]

DS frame rail sold, thanks Jerry!

[madpaddler]

Hoe does the passenger floor look from the tranny tunnel, half way up and half way back to the seat rails?

[jherko]

(nt)

[jherko]

Drives Side Front Floor Pan

[jherko]

Passenger Side Front Floor Pan

[jherko]

PS Rear Quarter

[jherko]

PS Frame Rail and rocker cover

[haromich]

The spare wheel well has several perforations that were filled bondo, looks ok but has typical rot where it was in constant contact with the spare tire. Its repairable in my opinion, I can cut it out for $25 + S/H. Your second inline for the pedal box surround, first with $ gets it. The complete pedal box w/ sorrounding metal is available for $40 + S/H. I have the interior panels listed in another ad with photos for $30 each / $50 pair + S/H. The exterior firewall pad is pretty dry rotted - I'm not sure I can get it off in one piece. Send me your email and I can reply with pics.

Much sounds like it's the same condition as mine. I was hoping (fantasy!) there were no perforations. Thanks for the quick reply. I'll go look around for the door panel listing. Harold

[maruni]

Hi,

I am interested in right side rear quater panel. My zip is 92703. Please e-mail. Thanks.