How do I jump the starter???

[nbristow01]

Ok guys, i know it is a dumb question, I look in the archives...I see the big lug with the batt cable, what do i jump it to??

[Tommy]

There is a small tab, normally connected to ignition switch, which controls solenoid. You need to connect + to that. You can get the + from the big nut with batt cable.

This way you actually jump the solenoid which then connects the high current to starter motor internally.

Be careful - whatever your target is with this!

Tommy

[Paul7002]

be careful is Right! Make sure it's in neutral, set the e-brake, and watchout for the fan.

[Richard]

Make sure you apply 12volts temporarley to the solenoid terminal. UNDER NO CIRCUMSTANCES JUMPER VOLTAGE DIRECTLY TO THE MOTOR....