• Upcoming Events

bmcallister

tii Compression Test

2 posts in this topic Last Reply

Recommended Posts

I'm going to compression test my '74 this weekend.

Understanding that consistency (within 10% between cylinders) is most important, what are "good" "fair" "poor" readings for a stock tii?

Thanks,

Bryan

Share this post


Link to post
Share on other sites

....before testiing - adjust valves COLD

to 0.006" ...0.008"

compression test 1502 - 2002tii

good = above 10.5 bar.... (149.3 lb/in)

normal = 9.5 bar............. (135.1...149.3 lb/in)

poor = below 9.0 bar....... (128 lb/in)

test procedure

use calibrated tester,

with battery fully charged,

engine at operating temperature

and throttle fully open.

Turn engine over at starting speed.

Share this post


Link to post
Share on other sites
Guest
You are commenting as a guest. If you have an account, please sign in.
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoticons maximum are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.