Camber gauge recommendations?

[peteinjp]

Generally I'm using a tire pyrometer (cheap longacer) to setup the camber but I am finding that I have no good way to record the results. I have been measuring at the adjusters on the front- but in the rear it will be difficult and front to rear comparisons cannot be made without some sort of relative measure. My floor is far from flat so measuring from the floor is not a good option.

[JohnN]

Once you get your car to a level place, you can measure camber with a framing square, a tape measure and a little trig. Jeff Ireland wrote a FAQ about doing it, it's cheap and accurate.

Regards,

John N

[TJW]

I have a camber gauge and occasionally do it as said in the Ireland tech. notes and is always the same, even with my shaky hands,