Headliner and A-pillar trim

[BOBERL15]

Has anyone attempted replacing the fabric on their headliner and a-pillar trims?

I need guidance.

Thanks,

Ben

[Stacey]

Just did the headliner last weekend. I kept everything I tore out so I could reverse engineer for patterns when I got to this point. "A" pillar trim, at least on late models, is black vinyl which runs the length between the top of the pillar to behind the dash. There is 1/2" closed cell foam 1" wide running under it. Edges of the vinyl contact glue around the pillar and under the windshield seal on one side, and under the edge binding on the door side. The headliner wraps over the top of the pillar trim, and is folded back under itself to present a clean edge. "B" pillar is vinyl matching the upholstery (no foam under it). The seam between the "B" trim and headliner are covered by the edge binding.

Dark beer works best.