Jump to content
  • When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

What is everybody using for their clutch kit needs


Guest Anonymous

Recommended Posts

Guest Anonymous

I am planning to upgrade my 2002 and I need to know what works best for 150 HP.

BAV has a sport kit for like 600+, there is got to be a better deal out there.

J.E.

Link to comment
Share on other sites

I've just recently installed a new JB Racing aluminum flywheel in my 76 (~160HP) which has the 320i 5-speed conversion. I'm using all 228mm parts.

I went with this combo (based on good advice from IE) for the clutch kit:

• A Sachs E30 M3 Pressure plate (this equates to the Sachs HD part in clamping force, for way less $, and retains stock-like clutch feel.)

• A Sachs Tii clutch disk (this has less copper friction material than the Sachs HD unit, but with the M3 pressure plate will hold very well.)

• A 323i Throw-out bearing (320i TO bearing is 215mm).

Depending on your particulars, you can get nice clutch kit from IE for around $200-350...

Where we goin’? … I’ll drive…
There are some who call me... Tom too         v i s i o n a u t i k s.com   

Link to comment
Share on other sites

  • 4 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Upcoming Events

  • Supporting Vendors

×
×
  • Create New...