Where can I buy a New Weber for my 02

[dilldh]

Do i need the serial # off the motor,or will a Weber fit on any 02 year model?

Thanks,David

[H_Krix]

if you're going with a 32/38, its a bolt-on to your current intake manifold, and the stock fuel pump will operate just fine. If you hav an electric choke, you're goign to have to route your waterlines elsewhere, but thats not too big of a deal.

Step up to anything larger (like a 38 or twin 40's) and you're looking at a new manifold, electric pump, etc.

Look at a couple of these sites for more info:

http://www.bmw2002.com/

http://terrysaytherauto.com/2002Weber.htm

[winstontj]

Check out Pierce Manifolds. They have everything. What year is your car and what is the stock manifold? Do you have the stock single barrel Solex carb? There were a few different setups and manifolds and you'll need to know that before you go and buy a carb. Got any pics? Put one up so we can see what you have...

[ingraham]

be sure to get the right model of 32/36. For example if you're in California, and you have a '76, be sure to get the K8205 or another model with a C.A.R.B exemption. In that case it's bes to buy from a vendor in CA, because they understand. Go to Pierce Manifolds, JAM Engineering, or any of the '02 parts vendors in CA.

[bmwjer]

David-

I have two brand new 32/36 carbs for a 2002. I was going to use them on my Bavaria, but changed my mind. One is a manual choke w/cable and another one is an electric choke.

I'm @ bmwjer@earthlink.net

Jerry Kingman

[bmwjer]

David-

I have two brand new 32/36 carbs for a 2002. I was going to use them on my Bavaria, but changed my mind. One is a manual choke w/cable and another one is an electric choke.

I'm @ bmwjer@earthlink.net

Jerry Kingman