Does anyone know if the big bumpers (Front)

[Victor_PR]

on 74-76 models can be installed "upside down"? My "under bumper" fog lamps got smashed so I would like to consider installing the round fog lamps that rest on the upper side of the bumper. I would like to use the already drilled holes on the bottom side for the new ones.

Thanks for any leads.

[Napes]

it seems to me like they could be flipped upside down with the holes all the same. Maybe someone will have a more definitive answer.

[Lars]

when I had mine off they appear to be the same either way, you just have to swap the bumper ends.

[Guest Anonymous]

I have mine off right now and it appears that you could flip them. You will want to clean or polish the side that has been facing down all these years.

[HarryPR]

Luis Carlos, the guy who bought my Mintgrun, took them but I believe he is not going to use them. I can ask him if you want it.

The only thing is that they are polished and require frequent care to keep them shiny. But you are good at that!

[Victor_PR]

I don't think it's all that bad to get some decent shine out of it.

I'll let you know.

BTW: I ordered a pair of Hella 6.5" round fog lamps today to mount on the bumper. Once I install them my car should look a little more like Ludwig! ;-).

Did you return to work?

[742002]

yes you can flip them, i flipped the one on my 74 because the top had too many deep scratches.

[HarryPR]

I'm back at the office today.

At least i was able to install the rear bumper on mine. Have the front one almost done, but still need to get some bumper guards and maybe send a couple of parts to the chrome shop.

See you soon,