anyone know whats correct?

[BLUNT]

they want to spray my inner trunk tomorrow with body schutz. do just the wheel housings get it or do you spray the inner 1/4 panels too? i think the trunk floor doesnt get any if i remember correctly. will someone set me straight? i have an email into mike self but he must be working or something,

imagine that

[Guest Anonymous]

I've got factory overspray on the inside of the fenders but it's on the wheel wells, in the spare tire well & overspray everywhere but that looks to be it...

[BLUNT]

when you say overspray do you mean body schutz like dieter just got in there and went nuts?

[Guest Anonymous]

no but like some guy in the factory had about 500 cars to do in a day, it wasn't masked off & some got here & there. it's obvious that it didn't belong on the inner fender but it got there in small amounts. Just so I don't ruin your accurate resto attempts I'd check with another few sources. Both my cars have it around and it looks like just a little overspray, not intentional. as if they had work to do at the factory and they knew that no one goes in the trunk anyway.

[BLUNT]

no but like some guy in the factory had about 500 cars to do in a day, it wasn't masked off & some got here & there. it's obvious that it didn't belong on the inner fender but it got there in small amounts. Just so I don't ruin your accurate resto attempts I'd check with another few sources. Both my cars have it around and it looks like just a little overspray, not intentional. as if they had work to do at the factory and they knew that no one goes in the trunk anyway.

ok thanks, i want my trunk nice. if bubbie throws me out it may be all i have

[TMK-001]

Mine is pretty messy too... over the rear shock mounts and up the rear 1/4 a bit. Mine is hidden by the original protection inserts though.

Todd

[DukeRimmer]

Undercoat goes on both 1/4s, both wheel houses, vertical panel behind seat, and trunk floor between wheels. The heavy coating ends 2"-3" ahead of tail lamps. Light overspray on 2"-3" of trunk floor under front of wood panels, and around lamps (very light on rear panel side of lamps). Doesn't apply to Blunt's '70, but on '74-'76 you want overspray on the reinforcment members that extend rearward from the wheel houses, parallel with the 1/4s.

But what about that wavy door gap?? Are you really going to live with that?? Is it fixed? Was it poor quality replacement parts?

[BLUNT]

excellent info, thank you. he has tweaked the door seams and its what id call as close to perfect as it can be. im happy with it and im glad i said something.

[TMK-001]

I have asked my body shop to make sure mine is right too... Todd