this seemed weird to me, knee trim

[BLUNT]

after reseaching hole locations for the knee trim i found in mike macartneys book that the knee trim angles down as it gets to the rear of the car. that it to say it drops a few mm's from the natural body line. ive never noticed this with the naked eye. if i hadnt looked i would have lined it up with the body line and been wrong

[oh2fly]

Hi Blunt, I just try to make it line up with the end of the long 72-73 bumpers for aesthetics. Never thought about just following the body line.

[BLUNT]

therein lies the problem. mines a 70 and bastardized. im running a 6 piece set of knee trim. im going to tape this shit on the side to make sure im getting the look im after. if it doesnt look right ill sell it.

[Guest Anonymous]

knee trim going down a few mm's in the rear? I can't find it.

I just had them drill out the putty in the old holes since I didn't need to replace the 1/4 panels. When it's all attached I plan on drawing a line and drill the 2 front ones for the fenders. Gotta make sure it's all lined up. Too bad it's already painted. I guess I'll just paint the fresh metal w/ nailpolish or something.

Gabe