Pluig wire loom/tube clamps P/N found

[mikem]

FYI

I found this while going through files.

Two each of 13 65 1 353 339 Hex Post Spacer and 12 12 1 350 clamps from a 635.

Install the spacers to the valve cover studs and then the clamps go on top of these studs holding the raceway above and to the side of the vc area. The nuts you had installing the vc then go to hold the clamps to the spacers.

http://i3.photobucket.com/albums/y74/mmiller2002/My%2076/plugwiretube.jpg

[Tim_in_MD]

Very helpful! I think I will be placing an order. However I think three numbers dropped from the second P/N...can you confirm that P/N?

Thanks!

[mikem]

(nt)