efi Thoughts on megasquirt wiring...

[slash02]

How did you guys wire your intake? I am thinking of putting a weatherproof 3 prong plug (as soon as i find something suitable) so that the intake can come off, just like it went on (see pic)

[-=Charley]

have you looked @ weatherpak stuff? we use them on the light-rail cars @ work. really professional stuff. if you want better than this, try cannon connectors.

http://order.waytekwire.com/CGI-BIN/LANSAWEB?WEBEVENT+L0A50A721109987000D4D091+M37+ENG

[AlCanuck]

I gotta agree with Charley. Weatherpak is a helluva good way to go.

Al

[slash02]

As soon as I find a vendor, I'll be laughing!

Thanks guys.

[AlCanuck]

As soon as I find a vendor, I'll be laughing!

Thanks guys.

At your sevice - http://www.midterminc.com/en-us/dept_55.html

Al

[slash02]

As soon as I find a vendor, I'll be laughing!

Thanks guys.

At your sevice - http://www.midterminc.com/en-us/dept_55.html

Al

As usual once again, you come through for me! Thanks man I'll be digging around on their site.

My whole thought process behind this is that the intake should be able to come off easily without a huge wiring mess left hanging. As those wiring looms and wire insulation ages it sometimes gets brittle, and it would be nice to build something to last... being able to disconnect certain points of the harness would be a good thing.

The relay board will be wired direct to the battery and switched +12 volts though, that is just because it looks like thats what the megasquirt guys intended.