found in NJ junkyard 1972 Alfa Spider & 16 x7 ronal 5 st

[dapbmw]

mostly complete, front bumpers are good rear has a dent, has BWA sportstars which might fit '02's anyway this place is in south jersey close to mays landing. dirke's u-pull-it. the ronals are for a 5 lug bmw they are 16 x 7 or 16 x8 deep dish e12/23/24/28/32/34, currently installed on a chevy s10

[BillyRay]

The 72 spider is worth a few bucks in parts.

Do you think the Ronals will fit an E9?

[Harv]

Spider wheels will not fit an o2. They are a bigger bolt circle that is the same as ford 4 bolt.

John

[BarryA]

mainly on the offset - early open hub (exposed lug bolt) Alpina's fit E3/E9 cars if I remember correctly, so fair chance the Ronals will too, but best to check the offset (look for an "ET" number cast into either the hub or back side of the rim) and compare it to the original wheels on the car.

On the Alfa spider, measure across a pair of opposing lug holes on the back side of the wheel to get the bolt circle - many 60's - 70's Italian cars (Fiat, Maserati BiTurbo, etc) use 4x98 mm bolt circle wheels (found out the hard way a few years ago when looking for alloy wheels for a '72 Fiat Spider) - BMW's use 4x100 mm wheels.