Jump to content
  • When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Clutch Slave Boot


David Nixon

Recommended Posts

Hi all, 

I am hoping someone out there might be able to help me out. 

 

My 67 2000 TiLux has a Clutch Slave cylinder that I have only seen in diagrams and one photo. Unfortunately, the cylinder is missing its dust boot and I can't seem to find any that state they are for it.

 

Is anyone able to point me in the right direction or have any information of where I could find one. 

 

Any help would be greatly appreciated.

 

Dave

21524648055.jpg

Clutch Part Number.PNG

Link to comment
Share on other sites

Dave,

It looks like the cylinder you have is no longer manufactured in lieu of a newer one. However, in that same diagram a the bottom, there's a *20 P/N 21521102934 Repair Kit which may work for your situation. A picture is attached.

 

Gurmail

 

Clutch Boot.jpg

1968 BMW 1600

Link to comment
Share on other sites

  • 1 month later...
  • 1 month later...

 Very interesting. I am thinking that you were looking for the kit metntioned above, which I have, but my car is a '67 base model, not a Tilux. Did the latter use a different slave cylinder?

 

06B12573-2470-4680-A606-2D7EE9605B25.thumb.jpeg.9c7846718be6c92c56b30a9977777899.jpeg
Realoem.com says they all used the same one. I think I have to investigate if the kit I found somewhere actually fits my car.

 

 

Edited by kiva667

1967 2000 #1326213 SOLD / 1972 2002 Verona - insurance loss / 1962 700 Luxus SOLD / 1975 530i Malaga SOLD

http://nk2000project.blogspot.com/

"Rust Never Sleeps"

Link to comment
Share on other sites

Thank you for the help so far. 

I also found out through my digging that this output cylinder is specific to RHD cars for some reason. Not sure as to why they might have done it differently when the LH drive model version clearly works.

 

Anyway, as the attached images show the boot is quite large. I am not sure how large but as the internal piston is 3/4 of an inch or roughly 19mm, the width (outside the bellows) of this boot must be close to 1 1/2 inches or at least 30mm. 

 

I incorrectly bought the rebuild kit sugested in this chat and in many online stores as none seem to state that it only applies to LHD models.    

 

In short the hunt continues. I found a complete output cylinder NOS on ebay (the one pictured) but as I am only missing the boot, I couldn't justify the $450+ AUD. 

 

Thanks again and any suggestions are always welcome. 

 

 

Clutch boot 2.jpg

Clutch boot.jpg

Clutch Part Number 2_LI.jpg

Link to comment
Share on other sites

This won't help but it's interesting how the parts book has the part number you reference. Someone hand wrote in the book I have yet a different number...

 

67B15494-9BAE-4850-BBBE-03671D13C46C.thumb.jpeg.a8701223c581f4982eeca96055604803.jpegCA5D85BF-69DB-4148-9222-C87B5888226F.thumb.jpeg.dea431c1e8cbc80f7f7b502c484cc640.jpeg

Edited by kiva667

1967 2000 #1326213 SOLD / 1972 2002 Verona - insurance loss / 1962 700 Luxus SOLD / 1975 530i Malaga SOLD

http://nk2000project.blogspot.com/

"Rust Never Sleeps"

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • BMW Neue Klasse - a birth of a Sports Sedan

    BMW Neue Klasse - a birth of a Sports Sedan

    Unveiling of the Neue Klasse Unveiled in 1961, BMW 1500 sedan was a revolutionary concept at the outset of the '60s. No tail fins or chrome fountains. Instead, what you got was understated and elegant, in a modern sense, exciting to drive as nearly any sports car, and yet still comfortable for four.   The elegant little sedan was an instant sensation. In the 1500, BMW not only found the long-term solution to its dire business straits but, more importantly, created an entirely new
    History of the BMW 2002 and the 02 Series

    History of the BMW 2002 and the 02 Series

    In 1966, BMW was practically unknown in the US unless you were a touring motorcycle enthusiast or had seen an Isetta given away on a quiz show.  BMW’s sales in the US that year were just 1253 cars.  Then BMW 1600-2 came to America’s shores, tripling US sales to 4564 the following year, boosted by favorable articles in the Buff Books. Car and Driver called it “the best $2500 sedan anywhere.”  Road & Track’s road test was equally enthusiastic.  Then, BMW took a cue from American manufacturers,
    The BMW 2002 Production Run

    The BMW 2002 Production Run

    BMW 02 series are like the original Volkswagen Beetles in one way (besides both being German classic cars)—throughout their long production, they all essentially look alike—at least to the uninitiated:  small, boxy, rear-wheel drive, two-door sedan.  Aficionados know better.   Not only were there three other body styles—none, unfortunately, exported to the US—but there were some significant visual and mechanical changes over their eleven-year production run.   I’ve extracted t
  • Upcoming Events

  • Supporting Vendors

×
×
  • Create New...