Half shaft for 1967 2000tilux

[Naseem Jarjoura]

I am in need of a replacement early style half shaft for my 2000tilux. I would be happy to keep it original but If anyone has a set of 2002 half shafts I am ready to do that as well. From what i understand the 2002 half shafts are compatible. 

 

Here is a pic of the one that i discovered with bits of metal breaking away at the joints.  Can’t believe the metal is breaking off the way it is and why?

 

thank you

Naz

 

 

[02tradition]

I’m pretty sure I have a set. I do know I also have a set of NOS boots as well. 

[Naseem Jarjoura]

It’s really strange how the metal just started breaking away. I could get away with just replacing the broken section if you have that on it’s own. Any help is appreciated. Let me know what you have and of course how much.

 

thanks

 

 

[02tradition]

3 hours ago, Naseem Jarjoura said:

It’s really strange how the metal just started breaking away. I could get away with just replacing the broken section if you have that on it’s own. Any help is appreciated. Let me know what you have and of course how much.

 

thanks

 

 

That looks just like the cap of the u joint. Might be replaceable. 

[Naseem Jarjoura]

You were correct 02! What I was seeing was the cap of the U joint breaking apart. I Picked up a 12 ton shop press yesterday and took it apart. For $130 it will pay for its self after a few uses.

 

I have to say. Removing those needle bearings was not easy. Even with the press.’