Side draft manifolds

[brendang2000]

Price: $150

Location: Phoenix, AZ

Description:

Hi all,

 

Got a pair of BMW side draft manifolds for unknown carbs (came without carbs with a 914 my friend bought).  The measurements between the carb mounting studs are 110mm & 70mm, and it's approximately 72-73mm between runner studs.  $150 plus shipping, which would most likely be a USPS flat rate box, local pickup in Phoenix, paypal prefered if shipping. 

 

 

Brendan

[Slavs]

Take a pic of the port side which mounts to the head. This is the side with no studs. This will help us determine if the manifolds are for a 1600-1800 or a 2000cc.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[brendang2000]

Here they are on my megasquirt 2.0 M10 test engine.

 

[resra]

39 minutes ago, Slavs said:

Take a pic of the port side which mounts to the head. This is the side with no studs. This will help us determine if the manifolds are for a 1600-1800 or a 2000cc.

 

Slavs, you are back! Glad to see you are doing well.

 

 

39 minutes ago, Slavs said:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

[Slavs]

Those appear to be the 1600ti manifolds. They match the 118 head of the 1600, 1600ti and 1802. They also match the 116 head of the 1800 and 1800ti NK cars. Although in this case the brass linkage shaft for the NK 1800ti linkage  has not been installed. They can be port matched to the 2000cc heads or used as is. I haven't checked the part number on them.