help me id source of this soft mount

[PatAllen]

pn on it say

1 128 582 1 BLAU

1 176 041 1 GRAU

 

[PatAllen]

[Preyupy]

It looks like the standard transmission mount from a E21 320i   very commonly used on 2002's

The numbers are casting #'s from the manufacturer and have nothing to do with the BMW part number. 

There are some that are round and others like this.  The most important dimensions are the stud sizes, if they are in alignment with each other and the thickness.  Many of the E9, E3, E12,E21, E24, E28, E30 etc used a mount very much like this.  The bigger cars used a bigger mount but the critical stud and thickness measurements were the same and you just wound up with a stiffer mount

[PatAllen]

found outt it is identical to e23 e32 and e34 mount only

 

thanks

[Einspritz]

Here you go:

 

https://www.realoem.com/bmw/enUS/showparts?id=1384-USA-07_1984_E30_BMW_318i&diagId=24_0466#24711128582

 

here's how it works; the numbers you provided, when you truncate the last digit, are the remainder digits of the BMW PN. so, you have to have an inkling of where the part came from, then you look up similar parts and add the preceding 4 digits.

 

Enter that in a parts lookup and then you find what it came out of.

 

I'll leave it to you to find the other number.

[PatAllen]

thanks very much

id like to find a bucket of theses, used. cheap. its for a machine project.