Jump to content
  • When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

51711813507 Door weatherstrip (2) - new


'76mintgrün'02

Recommended Posts

Price: $60
Location: Kingston, WA.


Description:

Pair of brand-new door-sill rubber-seals. 

 

$60 includes shipping (to lower 48).  PayPal Preferred.

022.thumb.JPG.b8be118edf9cf95d3057941f7576cc50.JPG021.thumb.JPG.6861e32a25431d613844b9af07ee40ec.JPG020.thumb.JPG.3cff661e907b6a1c043affb62cc583e6.JPG

Edited by '76mintgrün'02
price drop

     DISCLAIMER 

I now disagree with some of the timing advice I have given in the past.  I misinterpreted the distributor curves in the Blue Book. 

I've switched from using ported-vacuum to manifold, with better results. 

I apologize for spreading misinformation.  

Link to comment
Share on other sites

Hi Pat,

my original description was misleading, so I edited it. 

 

I am glad you asked, since it made me take the time to put the number into realOEM 

51711813507

Door weatherstrip

L=910  From: 11/01/1970

            To: -

I don't know why they do not give a To: date, but it appears as though they should fit a '70.

It is part number one in their diagram below.

 

Door, front

Edited by '76mintgrün'02

     DISCLAIMER 

I now disagree with some of the timing advice I have given in the past.  I misinterpreted the distributor curves in the Blue Book. 

I've switched from using ported-vacuum to manifold, with better results. 

I apologize for spreading misinformation.  

Link to comment
Share on other sites

Thanks Mike.

 

So only used from 70-72 then?

 

I guess I'll do more research.

 

Not for my '76... I know that much.  So I might as well pass them along.


Tom

 

EDIT

a little searching brought up this post by Lars, which may be helpful

 

 

Edited by '76mintgrün'02

     DISCLAIMER 

I now disagree with some of the timing advice I have given in the past.  I misinterpreted the distributor curves in the Blue Book. 

I've switched from using ported-vacuum to manifold, with better results. 

I apologize for spreading misinformation.  

Link to comment
Share on other sites

I think that part # is a new one for a part that went NLA years ago.

The original part # is 51 21 6 454 224 and that is shown (old parts book) for all Euro (incl Turbo) & US '02s except the 1502.

My first '02 (Oct '70 Euro LHD) had these on, but I have never seen another '02 with them.

  • Thanks 1

Les

'74 '02 - Jade Touring (RHD)

'76 '02 - Delk's "Da Beater"

FAQ Member #17

Link to comment
Share on other sites

Thank you Les.  So do these simply fit over the vertical seam between inner and outer sill panels?

 

My '76 has the plastic sill covers, with a different, smaller, tubular seal attached.

 

 

     DISCLAIMER 

I now disagree with some of the timing advice I have given in the past.  I misinterpreted the distributor curves in the Blue Book. 

I've switched from using ported-vacuum to manifold, with better results. 

I apologize for spreading misinformation.  

Link to comment
Share on other sites

1 hour ago, '76mintgrün'02 said:

Thanks Mike.

 

So only used from 70-72 then?

 

I guess I'll do more research.

 

Not for my '76... I know that much.  So I might as well pass them along.


Tom

Hey Tom

 

I have not much experience with anything prior to 1970 so I am not sure what was offered or available. These two piece moulding I believe were specific to models up to 73 when they went to a single much wider moulding that ran I believe to 76. I base that on having parted number of cars between 70-76.

 

My car was late late 71 production (reg. as a 72) but has a number of pieces  that were a mix of euro and NA options so  my observations could be skewed somewhat. ......  hth

 

  • Thanks 1
Link to comment
Share on other sites

Thank you for the information, Andy.

 

I feel sorry for you guys with those older early model cars, so I will lower the price by 25% :) 

 

Now they are $60, including shipping. 

 

 

     DISCLAIMER 

I now disagree with some of the timing advice I have given in the past.  I misinterpreted the distributor curves in the Blue Book. 

I've switched from using ported-vacuum to manifold, with better results. 

I apologize for spreading misinformation.  

Link to comment
Share on other sites

22 hours ago, '76mintgrün'02 said:

Thank you Les.  So do these simply fit over the vertical seam between inner and outer sill panels?

 

My '76 has the plastic sill covers, with a different, smaller, tubular seal attached.

 

 

I thought item 1 referred to the part that attaches to the bottom of the door, but I realise now, looking at the profile in your picture, that this is not that.

Les

'74 '02 - Jade Touring (RHD)

'76 '02 - Delk's "Da Beater"

FAQ Member #17

Link to comment
Share on other sites

I think they are just a simplified sill seal, eliminating the plastic part.

 

I received a PM expressing interest and they have been sold.

 

I appreciate all the information added to this thread.


Thanks, again.

 

Tom

     DISCLAIMER 

I now disagree with some of the timing advice I have given in the past.  I misinterpreted the distributor curves in the Blue Book. 

I've switched from using ported-vacuum to manifold, with better results. 

I apologize for spreading misinformation.  

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • BMW Neue Klasse - a birth of a Sports Sedan

    BMW Neue Klasse - a birth of a Sports Sedan

    Unveiling of the Neue Klasse Unveiled in 1961, BMW 1500 sedan was a revolutionary concept at the outset of the '60s. No tail fins or chrome fountains. Instead, what you got was understated and elegant, in a modern sense, exciting to drive as nearly any sports car, and yet still comfortable for four.   The elegant little sedan was an instant sensation. In the 1500, BMW not only found the long-term solution to its dire business straits but, more importantly, created an entirely new
    History of the BMW 2002 and the 02 Series

    History of the BMW 2002 and the 02 Series

    In 1966, BMW was practically unknown in the US unless you were a touring motorcycle enthusiast or had seen an Isetta given away on a quiz show.  BMW’s sales in the US that year were just 1253 cars.  Then BMW 1600-2 came to America’s shores, tripling US sales to 4564 the following year, boosted by favorable articles in the Buff Books. Car and Driver called it “the best $2500 sedan anywhere.”  Road & Track’s road test was equally enthusiastic.  Then, BMW took a cue from American manufacturers,
    The BMW 2002 Production Run

    The BMW 2002 Production Run

    BMW 02 series are like the original Volkswagen Beetles in one way (besides both being German classic cars)—throughout their long production, they all essentially look alike—at least to the uninitiated:  small, boxy, rear-wheel drive, two-door sedan.  Aficionados know better.   Not only were there three other body styles—none, unfortunately, exported to the US—but there were some significant visual and mechanical changes over their eleven-year production run.   I’ve extracted t
  • Upcoming Events

  • Supporting Vendors

×
×
  • Create New...