WTB - Petri 2002 steering wheel hub

[Vintagedavid]

Wanted to buy -- Petri hub and horn button to fit my 1972 BMW 2002TII.  I have the wheel, I just need the correct hub.

[JohnP_02]

Hi David, in all honesty you would probably be better off just buying a whole set up if you want an original hub and cover. BMW hubs are way more rare than the wheels, as the wheels were produced for other makes as well. But it's always possible, good luck! J

[stephers]

Try over on the E9 site as well, lot's of posts about Petri parts

[whs.de]

I can help with Petri wheel hub covers. I have 2002, E3/E9 covers and new the extra long CSL cover.

[2Red69s]

I might be interested in buying one of the CSL covers. Any idea of cost shipped to Los Angeles, CA USA ?

 

thanks!

[HBChris]

Dave,

 

The CSL cover is 12mm longer than the standard CS cover and you need the matching hubs of course, I don't know how long the 2002 hub/cover is which has the correct horn provisions, CS has a brass ring, just the opposite of the 2002..

 

Chris

[2Red69s]

Hi Chris, - (I'm guessing you meant this for me and not VintageDavid)

Yes, thanks, I know. John Pantel had kindly pointed out to me that I have a CSL Wheel and (4-rib) hub after i bought a standard cover from him and discovered it to be about 12mm too short. Some previous owner of the wheel/hub must have drilled it to accept the 2002 horn spring, so it's been on my car and functioning for a while.

[whs.de]

See pic for the difference between the covers. L to R 02-E9-CSL

 

 

 

[2Red69s]

CSl looks right to me...did you see the picture above of mu current set-up?

[whs.de]

I think CSL is the right one. The CSL cover lenght over all is 102mm. Check it.

Edited February 7, 2019 by whs.de