Limited slip 1,150

[pocho]

Recently gone through bearings found good new seals holes drilled for plug and play put your cover on and good to go. Los Angeles prefer local pickup

 

 

Sent from my iPhone using Tapatalk

[jrhone]

What’s the ratio?

[Roundeie]

3.91 : 1 based on the stamp. The pumpkin should show “25” if it’s turned forward a little further


Sent from my iPhone using Tapatalk Pro

[AceAndrew]

To be clear, the bearings were all replaced and the pumpkin was inspected (and had the bell washers replaced).  Subsequently, the breakaway measured a little more than 30ft/lbs, perfect for a hotrod.

[Buckeye]

1 hour ago, AceAndrew said:

breakaway measured a little more than 30ft/lbs, 

shouldn't breakaway be in in/lbs.?

[AceAndrew]

50 minutes ago, Buckeye said:

shouldn't breakaway be in in/lbs.?

 

LSD break-away? Not in my experience.

Edited September 8, 2018 by AceAndrew

[M2M3M3]

3 hours ago, Buckeye said:

shouldn't breakaway be in in/lbs.?

if breakaway is in in/lbs the LSD is totally worn out.....

[kbmb02]

On 9/7/2018 at 4:27 PM, pocho said:

Recently gone through bearings found good new seals holes drilled for plug and play put your cover on and good to go. 

 

Good price, someone will snap this up.

 (My data point: I just rebuilt one with E36 internals, cost was quite a bit more). -KB

[mahernan]

Interested in this unit. What would be the price shipped to 28036? please email me to restoengineering@live,com