Jump to content
Teelinger

020202 event - what are you bringing?

28 posts / 1846 viewsLast Reply

Recommended Posts

Just wanted to start a thread for us to post things we're planning on bringing to the event. Images and pricing would be good to include.

 

See you there!

 

James and Kermit

 

 

 

Share this post


Link to post
Share on other sites
(edited)

I'm trying to get a temperature check on whether there is any interest in the following:

  1. Two original front seats with solid vinyl, but moderate hinges and springs,  $500 OBO
  2. Four original 13" steel wheels with the "clip-on" chrome outer rings that are in pretty darn good shape.  There are some spots on the wheels where the silver paint is cracking, but no major rust at all.  $300 OBO
  3. One full set of all four original seat belts, where the spring retraction mechanisms still work, but are fairly weak.  $25.00

 

If you'd like to come take a look in advance of the meet-up let me know.  

  

IMG_8516.thumb.jpg.a2b9b485fc19d59c1d953e22f45d6a82.jpg

IMG_8517.thumb.jpg.e911c3d66802595e6b6177abd15a750b.jpg

IMG_8518.thumb.jpg.00c20d0742793c67eec0f6b5891bcfa8.jpg

IMG_8519.thumb.jpg.95ad1ed7c4f1e7d63b492a8e96c8e618.jpg

IMG_8520.thumb.jpg.1e28499e888225445eb94cee7807c883.jpg

IMG_8521.thumb.jpg.50549c42860016d748ee7139f677dfe1.jpg

IMG_8522.thumb.jpg.db359d5e34ee90358c0bf30166efe750.jpg

 

IMG_8523.thumb.jpg.f3a390beb5cf68d567ca1f727b91ffc0.jpg

IMG_8524.thumb.jpg.48ef42d2428494778b8b1a8d25426f17.jpg

IMG_8525.thumb.jpg.6db6c6dc76df677af6c22c277e1905ee.jpg

IMG_8526.thumb.jpg.bb43fe9b6556c6a49b11e8b7e0ad0b8c.jpg

IMG_8527.thumb.jpg.846c5144f8c7522c25b0df50ff3635b3.jpg

IMG_8528.thumb.jpg.0b687539d70be7165a625eedc361ed5a.jpg

Edited by wheelieking

Share this post


Link to post
Share on other sites
(edited)

Ok, here's what I'm bringing...

Bumper guards

Early front bumper ends

New distributor caps and rotors, unused

Hazard switches, button springs don't work but the switches do

Roundie instrument cluster, condition unknown - PENDING

Silver dollar speedo, condition unknown

Used flasher relay and new electronic switch upgrade - SOLD

Black and blue ignition coils, condition unknown

Early roundie turn signal stalk w wiper control - PENDING

Fuel filler gizmo, allows you to quickly fill up without spilling has everywhere - SOLD

Leather shift knob, press on type, good condition - SOLD

Late model steering wheel and extra pad, good condition - SOLD

Black Procar Scat rally seats and rails, driver condition

 

All for sale CHEAP. I need to make room in my garage.

 

James

 

IMG_20180128_125857.jpg

IMG_20180128_125850.jpg

IMG_20180128_125844.jpg

IMG_20180128_125839.jpg

IMG_20180128_125835.jpg

IMG_20180128_125832.jpg

IMG_20180128_125828.jpg

IMG_20180128_125825.jpg

IMG_20180128_125823.jpg

IMG_20180128_125813.jpg

IMG_20180128_125730.jpg

IMG_20180128_125712.jpg

IMG_20180128_125656.jpg

IMG_20170722_115612.jpg

15171741691537701906557196230556.jpg

Edited by Teelinger

Share this post


Link to post
Share on other sites
(edited)

 

James,

 

I am  coming down to pick up some leftovers that remain at Midnight MS. Thought I would load up my mule truck with some big and bulky stuff that is a bitch to ship.....just in case someone maybe in need.

 

I will update again before the event in case someone is looking for something specific. I need to clear out my shed.

 

Drive Shaft
4Spd trans
Flywheels (3)
Clutch & Pressure plates(2)
Tii calipers (rebuilt)
Drive Hubs
Big Bumper Moulding
Vent wings
Steering Column - 2(both keyed)
Rear frame
Rear Drums
Side Glass
Stock Radiator (2)
Late Model Trunk Lid
Late Model  Rear Clip
Stock Exhaust manifold and down pipe

Gutter trim (2.5 sets)

Alternator (2)

Starters (2)

Stock rotors

Steering Box

 

 

oh and a window regulator

 

looking forward to the event............ happy to pics provided upon request 

 

 

Mike

Edited by joysterm

Share this post


Link to post
Share on other sites

Thinking of bringing my 74tii that will be for sale soon. Is that appropriate, or is it just a parts swap.

Share this post


Link to post
Share on other sites

Come one come all, I know if at least one other who is bringing a car for sale. This would be a good venue to get the right eyeballs on the car. 

 

James

Share this post


Link to post
Share on other sites

I’m bringing some random stuff I still need to go through, but will at least have:

-IE stage 2 springs

-IE ceramic coated shorty header and stainless downpipe with O2 sensor bung.

-Bav Auto springs*

 

*Full disclosure on these springs- the rears sat way lower than the front, even 3 dot spring pads and a 3/4" spacer left the rear lower than the front. For a very low car, the front springs could probably be cut to match the rears.

Share this post


Link to post
Share on other sites
On 1/26/2018 at 6:07 PM, wheelieking said:

Two original front seats with solid vinyl, but moderate hinges and springs, 

How much are you asking?

 

On 1/28/2018 at 1:16 PM, Teelinger said:

Used flasher relay

5 bucks on Saturday?

 

On 1/28/2018 at 5:50 PM, joysterm said:

Stock Radiator

New? Pics? Price?

Share this post


Link to post
Share on other sites
15 minutes ago, slaviklungu said:

How much are you asking?

 

5 bucks on Saturday?

 

New? Pics? Price?

 

Trying to find comps is tough, but it looks like new vinyl kits are roughly $500 without the seats.  Given these aren't new vinyl, but in decent shape and include the seats, I'll start it at $500.  

Share this post


Link to post
Share on other sites
On 1/28/2018 at 9:54 PM, bento said:

I’m bringing some random stuff I still need to go through, but will at least have:

-IE stage 2 springs

-IE ceramic coated shorty header and stainless downpipe with O2 sensor bung.

-Bav Auto springs*

 

*Full disclosure on these springs- the rears sat way lower than the front, even 3 dot spring pads and a 3/4" spacer left the rear lower than the front. For a very low car, the front springs could probably be cut to match the rears.

 

I'm interested in the header and downpipe if they are good shape.  Thoughts on price?  

Share this post


Link to post
Share on other sites
40 minutes ago, wheelieking said:

 

I'm interested in the header and downpipe if they are good shape.  Thoughts on price?  

Only used for ~2 years, so still in nice shape. I generally go with 1/2 of new for used parts, so $225 ($335 + $117).

Share this post


Link to post
Share on other sites
(edited)
40 minutes ago, bento said:

Only used for ~2 years, so still in nice shape. I generally go with 1/2 of new for used parts, so $225 ($335 + $117).

Sold!  Now I'll just need the section from the downpipe back from @Ireland Engineering to be back in stock and I'll be able to replace my exhaust which has holes rusted in it. :) 

 

I might like to discuss the stage 2 springs at the meet up too.  At the moment I'm concerned they would be a little too harsh for 90% of the driving I do around Seattle.

Edited by wheelieking

Share this post


Link to post
Share on other sites



×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.