Ken

2002 Underground: New 188 diff. Rear Subframes, 4x100 and 5x120 Trailing arms and more.

20 posts in this topic Last Reply

Recommended Posts

Ken...do you have the stock steel pieces that surround the passenger side engine mount? The ones that are used to set and limit the amount of engine movement?  Mike

Share this post


Link to post
Share on other sites

Hi Ken 

I have a few questions regarding the subframe and trailing arms setup. 

-Does it include hubs? I would like to use 5x120 wheels. 

-What size of rotor and caliper can use? 

-Are you using  common or available parts for stuff like, hubs, bearings, cv joints shafts? 

Thanks

Share this post


Link to post
Share on other sites

Hi Rod,

Yes the hubs are part of the kit and are available in 4x100 or 5x120.  

The direct fit rotor and caliper for the 5x120 is the e30 m3 but some of the aftermarket kits will work but may require some fitting.

The wheel bearings and CV joints are OEM BMW e30 parts.  The halfshafts, stub axles and hubs are all custom made for us using 4340 chromoly, heat treated, and e-coated.  The stub axles are larger in dia. than the stock e30 and have 31 splines instead of 27 splines.

Thanks for your questions,

Ken 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now