Jump to content

hey re: sway bar long bolts


Guest Anonymous

Recommended Posts

Guest Anonymous

(the ones that join the sway bar to the front control arm)... theres a post about the urethane bushes below.

i was just wondering if anyone new the exact dimensions (thread size/pitch as well) of the original bolts...

i am having difficulty finding replacements... (had to cut mine cause they were bent). if i cant find them are there any intrinsic problems with using threaded bar cut to length and double (lock) nuts at each end??

cheers boys...

ozgeorge

Link to comment
Share on other sites

Guest Anonymous

The OE stab bar bolts are M8x160x1.25

Aftermarket urethane end link kits usually use larger diameter bolts.

For the installation problem discussed earlier:

If the bolt provided is too short to fit the stack of bushings/washers/spacer tube, then you need a longer bolt or a shorter spacer tube. Do you have a way to cut some length off the tube?

One thing else to watch for is the aftermarket cupped washers are often too great a diameter to fit between the stamped control arms bent flanges. You may use new OE 2002 cupped washers modified by enlarging the center hole to fit the aftermarket bolt, and they fit on the control arms better. With the urethane bushings, I invert the cupped washers so the concave side holds the bushing (opposite of OE fitment). I make my own spacer tubes from stainless tubing, to get the length which leaves the stab bar's arms parrallel to the ground at the cars present ride height. That way you are loading the forces into the bar at the best angle.

Link to comment
Share on other sites

Guest Anonymous

Cool... I could definitely dremel off a bit of the spacer if I can't find longer bolts.

It sounds like there are not a lot of issues with playing around with these things, as long as the bar ends up in a fairly horizontal plane once the car is loaded.

Link to comment
Share on other sites

Guest Anonymous

I just stopped by the local OSH and picked up some 5/16, 7" cap bolts with appropriate nylock nuts. They're US grade 5, which I understand is comparable to the 8.8 grade too-short bolts that I already have... Looks like these will resolve my issue for a buck and change.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • BMW Neue Klasse - a birth of a Sports Sedan

    BMW Neue Klasse - a birth of a Sports Sedan

    Unveiling of the Neue Klasse Unveiled in 1961, BMW 1500 sedan was a revolutionary concept at the outset of the '60s. No tail fins or chrome fountains. Instead, what you got was understated and elegant, in a modern sense, exciting to drive as nearly any sports car, and yet still comfortable for four.   The elegant little sedan was an instant sensation. In the 1500, BMW not only found the long-term solution to its dire business straits but, more importantly, created an entirely new
    History of the BMW 2002 and the 02 Series

    History of the BMW 2002 and the 02 Series

    In 1966, BMW was practically unknown in the US unless you were a touring motorcycle enthusiast or had seen an Isetta given away on a quiz show.  BMW’s sales in the US that year were just 1253 cars.  Then BMW 1600-2 came to America’s shores, tripling US sales to 4564 the following year, boosted by favorable articles in the Buff Books. Car and Driver called it “the best $2500 sedan anywhere.”  Road & Track’s road test was equally enthusiastic.  Then, BMW took a cue from American manufacturers,
    The BMW 2002 Production Run

    The BMW 2002 Production Run

    BMW 02 series are like the original Volkswagen Beetles in one way (besides both being German classic cars)—throughout their long production, they all essentially look alike—at least to the uninitiated:  small, boxy, rear-wheel drive, two-door sedan.  Aficionados know better.   Not only were there three other body styles—none, unfortunately, exported to the US—but there were some significant visual and mechanical changes over their eleven-year production run.   I’ve extracted t
  • Upcoming Events

×
×
  • Create New...