Jump to content
jcnnjc

Bmw M10 Connecting Rod Bearings Third Undersize

11 posts / 1701 viewsLast Reply

Recommended Posts

Does anyone know where they sell this size, I can only find 1 place and thats BMW they want 13 bucks each

My motor is a factory replacement motor and it had 1st over on mains and 3rd over on conn rods

will have to find a new crank if I cant find bearings?

Thanks

Jim

Share this post


Link to post
Share on other sites

13 dollars each isn't that bad. Whats the issue?

Share this post


Link to post
Share on other sites

13 dollars each isn't that bad. Whats the issue?

13x8 thats per half

Share this post


Link to post
Share on other sites

I've never heard of bearings being sold by the half. I would confirm that.

Share this post


Link to post
Share on other sites

absolutely bizarre. Give Ireland Engineering a call; they should be able to get you bearings in most sizes. 

Share this post


Link to post
Share on other sites

Make up your mind.  Are the bearings oversized or undersized? 

The way I see it, when a crank has been ground, it is obviously undersized and then requires an undersized bearing-shell.  We’re talking diameter here, not shell thickness.  And yes, bearing shells are sometimes sold individually.

Share this post


Link to post
Share on other sites

Just checked with mahle clevite..  they only list std and 10's..  ur going to either have to pony up and buy halves at dealer prices or find a crank.

Share this post


Link to post
Share on other sites

Rockauto lists Glyco as still having .75mm undersize.  They usually have what they say they have, unlike a lot of others.

 

$50.  They've been around a long time.

 

Try Blunt, too.

 

t

Share this post


Link to post
Share on other sites

Rockauto lists Glyco as still having .75mm undersize.  They usually have what they say they have, unlike a lot of others.

 

$50.  They've been around a long time.

 

Try Blunt, too.

 

t

will try rockauto Thanks!

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.