Jump to content

pics of badge bar and light package concept ??


Guest Anonymous

Recommended Posts

Guest Anonymous

standard.jpg

here is the badge bar from jaymic: all stainless with hand welds of attachment tabs and light tabs:standard.jpg here is what i am thinking of doing, except the outter 6 inch will be yello Hella fogs, the inner are super oscars: standard.jpg and here is the fuse buss box i referred to in prior post: standard.jpg anyone have this bar? I am going to have to have 2 more tabs welded to it. any boat yard tower builder can do it- they are experts with stainless welding. what do you all think?

Link to comment
Share on other sites

Guest Anonymous

quarterview.jpg

I have very simliar foglights (combo of 150 backs, and 160 lenses) in exactly the same place. I'm defintely interested in how your new light installation turns out.

Link to comment
Share on other sites

Guest Anonymous

unless you somehow reinforce them. my Super

Oscars vibrate like hell (and barely even clear the

grills which could be another potential problem.)

my .02¢

Brent Miller

'71 1600

'75 2002

'86 535i

'85 735i

Little Rock, AR

Link to comment
Share on other sites

Guest Anonymous

standard.jpg

Aardvark may sell a guide-wire tensioner type device that attaches to back of the light and then to some hard point. It can be adjusted with turbuckle tensioner. I hope that will calm the shakes down. You make a good point about clearence: the bodies of the Oscars are at powder coater now, so i will have to wait to see if they will fit on the bat where it must attach. If not, another item for my venture into sales land.

Link to comment
Share on other sites

Guest Anonymous

standard.jpg

bolt through the fender. We took a quick look to see if there was enough thread to just put them on the exposed part of the bolt, but that seems to lower the bar too low. So I will have to dismantle the fender and bumperettes/overriders and see what is involved.The bar is very nicely mmade: i really want to use it for the aux lights. I just might have to settle for smaller lights depending on light housing depth to grill. I will post the whole thing as it evolves. it better work- that bar was expensive!

Link to comment
Share on other sites

Guest Anonymous

Doesn't cure ALL the shakes as they are sitting out on a flimsy bumper to begin with, but try it with out the support- looks disco strobe!

Hey, who's the instructor with you at Sears?

Link to comment
Share on other sites

Guest Anonymous

standard.jpg

not sure who instructor was. PO logged a lot of time @ Sears in that car. Laguna too. I plan to do as many schools as i can afford. In fact, I want to do the oct. 31 sears school. Bruce saw the car and really wants me to bring it. I wonder if the instructors will let me have any seat time...lol .

Link to comment
Share on other sites

Guest Anonymous

don't mount directly to bumpers (esp chrome ones). I used L-shaped brackets from the Unistrut catalog--they're 1/4 inch thick and bolt to one of the chrome carriage bolts that hold the bumper sections together. Believe me, my lights don't wiggle mounted on them! If you want details, e-mail me...I did a column on this 5-6 years ago.

Cheers

Mike

Link to comment
Share on other sites

Guest Anonymous

That's the line I use at the car clinics when I get a good car.

Here's my tip: After 3 more laps, just tell the instructor you are going to be sick. They'll stop everytime.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • BMW Neue Klasse - a birth of a Sports Sedan

    BMW Neue Klasse - a birth of a Sports Sedan

    Unveiling of the Neue Klasse Unveiled in 1961, BMW 1500 sedan was a revolutionary concept at the outset of the '60s. No tail fins or chrome fountains. Instead, what you got was understated and elegant, in a modern sense, exciting to drive as nearly any sports car, and yet still comfortable for four.   The elegant little sedan was an instant sensation. In the 1500, BMW not only found the long-term solution to its dire business straits but, more importantly, created an entirely new
    History of the BMW 2002 and the 02 Series

    History of the BMW 2002 and the 02 Series

    In 1966, BMW was practically unknown in the US unless you were a touring motorcycle enthusiast or had seen an Isetta given away on a quiz show.  BMW’s sales in the US that year were just 1253 cars.  Then BMW 1600-2 came to America’s shores, tripling US sales to 4564 the following year, boosted by favorable articles in the Buff Books. Car and Driver called it “the best $2500 sedan anywhere.”  Road & Track’s road test was equally enthusiastic.  Then, BMW took a cue from American manufacturers,
    The BMW 2002 Production Run

    The BMW 2002 Production Run

    BMW 02 series are like the original Volkswagen Beetles in one way (besides both being German classic cars)—throughout their long production, they all essentially look alike—at least to the uninitiated:  small, boxy, rear-wheel drive, two-door sedan.  Aficionados know better.   Not only were there three other body styles—none, unfortunately, exported to the US—but there were some significant visual and mechanical changes over their eleven-year production run.   I’ve extracted t
  • Upcoming Events

×
×
  • Create New...