Jump to content
Kpeters

Jet recommendations 32/36

3 posts / 436 viewsLast Reply

Recommended Posts

Hey guys I got a Webber 32/36 currently installed that came from Texas so almost sea level and now the car is operating from 2500ft to 4500ft most of the time it will be at 3000ft.

What would be the best settings for this altitude?

Thanks!

Share this post


Link to post
Share on other sites

you'll want a setting slightly LEANER

than what my perscription will give you.

you can start with the perscription and

road-test and determine where to go with

jet sizes after

...my WEBER prescription:

32/36

Float Level 40mm

PRIMARY

idle 60

main 140 (may need 130)

air correction 145

SECONDARY

idle 55

main 170 (may need 160)

air correction 175

AND -PLUG THE SECONDARY ENRICHMENT HOLE AT THE TOP OF THE CARB AS MY DIAGRAM SHOWS . DON'T ASK WHY- JUST DO IT AND SEE THE HUGE DIFFERANCE IN ACCURATE FUEL METERING THROUGH OUT ALL RPM AND THROTTLE OPENINGS.

3236float.gif

>

Share this post


Link to post
Share on other sites

Thanks c.d! will get the new jets, try the settings and check back. Your information is very helpful as always.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.




×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.