Guest Anonymous Posted July 16, 2003 Share Posted July 16, 2003 How does anybody who run the sidedrafts run the connection between the heater core and the output to the cylinder head? The previous owner lopped the output spout and welded it shut due to interference- any other remedies? Quote Link to comment Share on other sites More sharing options...
Guest Anonymous Posted July 16, 2003 Share Posted July 16, 2003 and used a different water outlet. You could alwayd fab something... t Quote Link to comment Share on other sites More sharing options...
Guest Anonymous Posted July 16, 2003 Share Posted July 16, 2003 The 80-83 320I(even the 77-79 too i think) used a mnetle tube that went under the manifold. to the heater core. the also get the water neck that bolts onto the head. It has only the two ports for the radiator and water pump. It replaces the 3 port one. HTH Andy Rattley Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.