Jump to content

Recommended Posts

Hey guys.

Just got my first 2002 and the wiper blade came off. The spline is still inside of it. The other side doesn't have a wiper but it had the spline. I was thinking take the nut that holds the spline on and put it onto the other wiper. But there is a clip on the inside of the wiper. My question is how do I take that off. Here is a picture of what I'm talking about.

http://imgur.com/xWhNn

Thanks,

Brandon

Link to post
Share on other sites

And '02 wipers don't use nuts to hold them on--the clip is what secures the wiper arm's base onto the splined shaft of the wiper linkage. I had an arm separate from the shaft on the interstate on a rainy day. Thankfully, it laid nicely on the louvers at the rear of the hood until I could get off at an exit and stick the arm back on!

-Dave

Link to post
Share on other sites
Well I have one good spline on the passenger side. Can I swap where the arm mounts to the wiper linkage from side to side by removing the nut on the bottom on the body

Not sure on that--those shafts connect to the linkage under that panel. They may be different. I haven't messed with the linkage enough to give you a good answer, sorry. The diagrams on realoem.com might help you.

-Dave

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.